Bollards and door protection in Bridgwater

In short

Loading bays take a beating from reversing trailers. At sites in Bridgwater, we can replace worn dock bumpers, add wheel guides and fit corner bollards to protect doors, levellers, shelters and the building itself.

Town: Bridgwater
Postcode district: TA6
Area: Somerset
Survey: Free for new installations

Options for bollards and door protection in Bridgwater

Dock bumpers. Fresh bumpers keep trailers off the wall, the leveller and the shelter.
Wheel guides. Apron guides that centre trailers on the bay.
Frame buffers. Buffers cushion knocks to frame edges and wall corners around the opening.
Steel bollards. Galvanised, painted steel bollards, concrete-filled where needed.
Guide-rail guards. Protect the bottom of guides and tracks, where forks and pallets strike most often.

What this work can involve

Installing wheel guides and corner bollards on a run of loading bays to protect the shelter frames.
Adding steel guide-rail guards to a row of sectional loading doors at a distribution centre.
Replacing bent bollards and checking the slab and anchors around them before fitting new fixings.

What the law expects at a loading bay

Across Great Britain, including Bridgwater, loading bays bring together several duties: maintained work equipment under PUWER 1998, safe traffic routes under the Workplace Regulations 1992, and safe powered doors under the Supply of Machinery (Safety) Regulations 2008. Dock levellers should meet BS EN 1398, and the site's risk assessment should cover vehicle creep and drive-aways.

Access, phasing and timing

Where a door is being replaced, the opening has to be made secure at the end of each day. We plan strip-out, any new framing and the new door so the gap is never left open overnight unless you have agreed temporary measures.

Guide prices for bollards and door protection

Bollards and door protection guide prices
Item	Guide price (ex VAT)
Bollard, installed	£125 – £445 each
Door protection (guide-rail guards, buffers)	£345 – £1,495 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about bollards and door protection

Can you protect our existing doors in Bridgwater?

Yes. Guards, buffers and bollards are fitted around existing doors and frames. If a guide or frame is already bent, we recommend repairing it first so the door runs properly behind its new protection.

How long does it take to fit door protection in Bridgwater?

Usually a few hours per door for base-plated bollards and guide guards. Bollards set in foundations take longer because of coring or excavation, and are often fitted out of hours to avoid disrupting traffic.

Can bollards at our Bridgwater site be replaced after a strike?

Yes. Damaged bollards and guards can usually be replaced individually. We check the fixings and the slab around them first, because a bent bollard often loosens its anchors or cracks the concrete at its base.

Bollards and door protection near Bridgwater

Working in Bridgwater? We also take on jobs in Burnham-on-Sea, Taunton, Weston-super-Mare and across Somerset.

Other services in Bridgwater

More about Bollards and door protection · industrial doors in Bridgwater. Last updated 19 October 2026.