The short version
Protect new or existing doors in Horley (RH6) with impact protection sized for the trucks and trailers that pass them every day, fitted in a few hours per door with minimal disruption to your traffic.
- Town
- Horley
- Postcode district
- RH6
- Area
- Surrey
- Survey
- Free for new installations
Options that matter on site
- Polymer bollards. Flexible bollards that absorb impact and spring back.
- High visibility. Bright finishes make protection easy for drivers to see and avoid.
- Suitable fixings. Base-plated or set in foundations, chosen for your slab.
- Steel bollards. Galvanised, painted steel bollards, concrete-filled where needed.
- Frame buffers. Buffers cushion knocks to frame edges and wall corners around the opening.
Jobs we can carry out
- Placing bollards beside a fire shutter so stored goods and trucks cannot obstruct its closing line.
- Installing wheel guides and corner bollards on a run of loading bays to protect the shelter frames.
- Replacing bent bollards and checking the slab and anchors around them before fitting new fixings.
Who is responsible for loading bay equipment at a site in Horley?
The employer or occupier is. PUWER 1998 requires work equipment to be maintained and inspected, and the Workplace Regulations 1992 cover vehicle and pedestrian routes around the dock. In practice that means planned servicing of levellers and doors, daily pre-use checks and a clear procedure to stop trailers moving during loading.
Planning the work around your site
Downtime matters on a working site, so the programme is set around your shifts. For a single door the opening is usually needed for a day; multi-door jobs are done one bay at a time so deliveries keep moving.
Budgeting for bollards and door protection in Horley
| Item | Guide price (ex VAT) |
|---|---|
| Bollard, installed | £125 – £445 each |
| Door protection (guide-rail guards, buffers) | £345 – £1,495 per door |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Your questions about bollards and door protection
How long does it take to fit door protection in Horley?
Usually a few hours per door for base-plated bollards and guide guards. Bollards set in foundations take longer because of coring or excavation, and are often fitted out of hours to avoid disrupting traffic.
Do you replace dock bumpers across Surrey?
Yes. We replace worn dock bumpers and fit wheel guides and corner bollards at loading bays across Surrey, often during a leveller service or bay refurbishment to save a separate visit.
Will fitting bollards damage the floor at our Horley site?
We check slab thickness and look for buried services before drilling. Polymer bollards and proper foundations reduce the risk of slab cracking on heavy impacts, and we recommend the right fixing for your floor.
Bollards and door protection near Horley
Our teams cover Horley (RH6) and nearby Crawley, Redhill, Reigate, along with the rest of Surrey.
- Bollards and door protection in Crawley
- Bollards and door protection in Redhill
- Bollards and door protection in Reigate
- Bollards and door protection in East Grinstead
- Bollards and door protection in Caterham
- Bollards and door protection in Coulsdon
Other services in Horley
- Sectional overhead doors
- Industrial door replacement
- High-speed doors
- Door automation and controls
- Dock shelters and seals
- Door safety upgrades
- Fire shutters
- Cold store and freezer doors
More about Bollards and door protection · industrial doors in Horley. Last updated 19 October 2026.
