Cold store and freezer doors across Bristol

The short version

Cold store and freezer doors for food producers, distributors, kitchens and pharmaceutical sites in Bristol. We survey the room, opening and traffic, then supply and fit an insulated door with the right seals and safety release.

Area: Bristol
Nation: England
Main town: Bristol
Survey: Free for new installations

What we fit in Bristol

Inside release. Every door can be opened from inside without a key, even if locked from outside.
Heated frames. Freezer frames and thresholds are kept just warm enough that ice cannot form on the seals.
Thick insulation. Insulation thickness is chosen for your operating temperature, with heavier leaves for freezers.
Tight seals. The leaf pulls in against its gaskets on closing so cold air stays where it belongs.
Hygienic finishes. Plastisol-coated steel, stainless steel or GRP for food and pharmaceutical use.

What this work can involve

Installing a high-speed freezer door in front of an existing sliding cold store door on a busy picking route.
Fitting a hinged chiller door with a stainless steel finish to a walk-in cold room in a commercial kitchen.
Adding a heated pressure relief valve to a freezer room where suction makes the door hard to open once it closes.

Powered door rules that apply in Bristol

Bristol is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

Access, phasing and timing

Downtime matters on a working site, so the programme is set around your shifts. For a single door the opening is usually needed for a day; multi-door jobs are done one bay at a time so deliveries keep moving.

Prices for cold store and freezer doors in Bristol

Cold store and freezer doors guide prices
Item	Guide price (ex VAT)
Cold store / freezer door (sliding)	£6,495 – £17,995
High-speed fabric door	£7,495 – £15,995

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Questions from businesses in Bristol

Do you repair cold store doors in Bristol?

Yes. We replace gaskets, frame heaters, rollers, tracks, releases and drives on most makes. Repair visits are chargeable, and we quote before larger repairs or recommend replacement when the leaf itself has failed.

Can you replace a freezer door at our Bristol site without losing stock?

We plan the change with you and your refrigeration engineer. Many doors can be swapped in a day, sometimes with stock moved or the plant set back temporarily, so the room returns to temperature quickly.

Do you supply cold store doors for food businesses in the South West?

Yes. We supply and fit cold store doors with hygienic finishes for food producers, processors, distributors and commercial kitchens across the South West, and we talk through your hygiene, cleaning and audit requirements at the survey before recommending a finish.

Towns in Bristol we cover

We cover 4 towns in Bristol for cold store and freezer doors, including Bristol, Brislington, Fishponds, Avonmouth.

Other services in Bristol

More about Cold store and freezer doors. Last updated 19 October 2026.