In short
Mixed fleet at your Workington (CA14) site, with vans, rigid lorries and trailers? We size the platform and lip so forklifts and pallet trucks get a manageable slope across the full range of bed heights.
- Town
- Workington
- Postcode district
- CA14
- Area
- Cumbria
- Survey
- Free for new installations
What we fit in Workington
- Door interlocks. Linking the leveller and door controls prevents either one being used out of sequence.
- Pit work. We sort the pit too, from re-edging an old one to detailing a new one.
- Swing-lip levellers. Hinged lips that flip out and land on the trailer bed, suited to most loading bays.
- Sized to your fleet. Platform length and capacity chosen for your vehicles and forklifts.
- Commissioning. Each leveller tested and handed over with records and instructions.
Examples of work we can quote for
- Fitting telescopic-lip levellers for a fleet whose trailers do not always park tight against the dock buffers.
- Sizing a longer leveller platform for a bay that receives both low-bed vans and high-bed articulated trailers.
- Supplying box-frame levellers to a groundworks contractor for casting into a new-build dock edge.
Who is responsible for loading bay equipment at a site in Workington?
The employer or occupier is. PUWER 1998 requires work equipment to be maintained and inspected, and the Workplace Regulations 1992 cover vehicle and pedestrian routes around the dock. In practice that means planned servicing of levellers and doors, daily pre-use checks and a clear procedure to stop trailers moving during loading.
How the work is organised
Where a door is being replaced, the opening has to be made secure at the end of each day. We plan strip-out, any new framing and the new door so the gap is never left open overnight unless you have agreed temporary measures.
Guide prices
| Item | Guide price (ex VAT) |
|---|---|
| Dock leveller, hydraulic swing-lip, into prepared pit | £6,495 – £10,995 |
| Dock leveller, telescopic lip | £8,495 – £13,995 |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Dock levellers in Workington: your questions
Which leveller type suits our vehicles in Workington?
Swing-lip suits most standard trailer traffic. Telescopic lip suits vehicles parked off the buffers, trailers with tail lifts, or loads packed right to the rear. We recommend after recording your vehicles on survey.
Do you install levellers on new-build sites around Workington?
Yes. We provide pit details to your groundworks contractor early, supply box-frame or pit-fitted levellers and install them to the main contractor's programme, along with doors and shelters if needed.
Can you replace the dock leveller at our Workington warehouse using the existing pit?
Usually, yes. We measure the pit on survey and allow for any cutting, repair or re-edging needed. If the new unit is a different size, the quote covers the pit modifications as a separate line.
Dock levellers near Workington
Workington is in the CA14 postcode district in Cumbria. We also cover Whitehaven, Carlisle, Kendal.
- Dock levellers in Whitehaven
- Dock levellers in Carlisle
- Dock levellers in Kendal
- Dock levellers in Barrow-in-Furness
- Dock levellers in Morecambe
- Dock levellers in Lancaster
Other services in Workington
- Door automation and controls
- Fire shutters
- Planned maintenance contracts
- Industrial door motor replacement
- Industrial door repairs
- Impact traffic doors
- Industrial roller shutters
- Dock shelters and seals
More about Dock levellers · industrial doors in Workington. Last updated 19 October 2026.
