The short version
New-build loading docks in Oxfordshire need levellers planned early. We provide pit details for the groundworks contractor, then fit and commission the levellers and interlock them with the dock doors once those are in.
- Area
- Oxfordshire
- Nation
- England
- Main town
- Oxford
- Survey
- Free for new installations
What to specify
- Velocity fuse. Hydraulic safety valve locks the platform if a hose fails or a trailer moves.
- Door interlocks. Linking the leveller and door controls prevents either one being used out of sequence.
- Telescopic lips. A sliding lip that reaches further and lands exactly where the driver needs it.
- Sized to your fleet. Platform length and capacity chosen for your vehicles and forklifts.
- Pit work. Existing pits repaired or re-edged; new pits detailed for groundworks.
What this work can involve
- Supplying box-frame levellers to a groundworks contractor for casting into a new-build dock edge.
- Fitting telescopic-lip levellers for a fleet whose trailers do not always park tight against the dock buffers.
- Interlocking new hydraulic levellers with sectional dock doors so neither can be used out of sequence.
What the law expects at a loading bay
Across Great Britain, including Oxfordshire, loading bays bring together several duties: maintained work equipment under PUWER 1998, safe traffic routes under the Workplace Regulations 1992, and safe powered doors under the Supply of Machinery (Safety) Regulations 2008. Dock levellers should meet BS EN 1398, and the site's risk assessment should cover vehicle creep and drive-aways.
Access, phasing and timing
Sites in and around Oxfordshire vary from tight trade counters to large distribution yards. The survey records access for our vehicle and platform, overhead obstructions and floor condition so the installation day runs without surprises.
Budgeting for dock levellers in Oxfordshire
| Item | Guide price (ex VAT) |
|---|---|
| Dock leveller, hydraulic swing-lip, into prepared pit | £6,495 – £10,995 |
| Dock leveller, telescopic lip | £8,495 – £13,995 |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Your questions about dock levellers
How much is a dock leveller in Oxfordshire?
Our guide price is £6,495 to £10,995 ex VAT for a hydraulic swing-lip leveller into a prepared pit, and £8,495 to £13,995 for telescopic lip. Your fixed price in Oxfordshire, including any pit work, is confirmed in writing after a free survey.
Do you install levellers on new-build sites around Oxfordshire?
Yes. We provide pit details to your groundworks contractor early, supply box-frame or pit-fitted levellers and install them to the main contractor's programme, along with doors and shelters if needed.
How long does it take to fit a dock leveller in Oxfordshire?
A single leveller into a prepared pit is typically fitted and commissioned in a day. Pit repairs or modifications can add time, and we plan work around your loading schedule, bay by bay.
Towns in Oxfordshire we cover
We cover 6 towns in Oxfordshire for dock levellers, including Oxford, Banbury, Abingdon, Bicester.
Other services in Oxfordshire
- Sliding and folding industrial doors
- Insulated roller shutter doors
- Fire shutters
- Cold store and freezer doors
- Industrial door replacement
- Steel personnel and fire exit doors
- Complete loading bays
- Door automation and controls
More about Dock levellers. Last updated 19 October 2026.