Industrial door motor replacement in High Wycombe

In short

Industrial door motor replacement for roller shutters, sectional doors and sliding doors in High Wycombe. We diagnose the fault, match a new drive to the door and re-commission it with safety devices tested.

Town: High Wycombe
Postcode district: HP11
Area: Buckinghamshire
Guide price: £845 – £2,395

How we look after doors in High Wycombe

Re-commissioning. Limits set, cycles tested and safety devices checked before handover.
Panel upgrades. New control panels with monitored safety inputs and inverter options.
Force testing. Closing forces measured to BS EN 12453 where the door closes under power.
Fault diagnosis. Diagnosis comes first, so you only pay for the parts the door actually needs.
Obsolete motors. Equivalent drives with adapters where the original model is no longer made.

Examples of work we can quote for

Diagnosing a stalling roller shutter to confirm whether the motor, a broken spring or the control panel is at fault.
Replacing a burnt-out direct-drive motor on a loading bay door and fitting an inverter control panel at the same time.
Re-commissioning a sectional door once a new motor is fitted, including new limit settings and closing force tests.

Powered door rules that apply in High Wycombe

High Wycombe is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

How the work is organised

On a first visit we record each door's make, size, control type and condition. That record makes later repairs quicker to price and helps you plan replacements before a door fails.

Prices for industrial door motor replacement in High Wycombe

Industrial door motor replacement guide prices
Item	Guide price (ex VAT)
Motor replacement	£845 – £2,395
Repair visit (attendance and first hour)	£145 – £195

Guide prices excluding VAT, which is added at the current rate where it applies. The visit price is agreed before we attend, and any repair is quoted before we carry it out.

Questions from businesses in High Wycombe

Is the motor really the problem with our door in High Wycombe?

Not always. Broken springs, damaged guides, failed panels, safety device faults and supply problems can all look like a failed motor. We diagnose first so you do not pay for a motor that will not fix the fault.

Do you replace motors on any make of door across Buckinghamshire?

We replace motors on most makes of roller shutter, sectional, sliding and high-speed door across Buckinghamshire, whoever installed them, subject to a suitable drive being available for the door's weight and mounting.

Can you replace an obsolete door motor in High Wycombe?

Yes. Where the original is no longer made, we fit an equivalent drive with any adapter plates or couplings needed, then set limits and test the safety devices before the door goes back into use.

Industrial door motor replacement near High Wycombe

Working in High Wycombe? We also take on jobs in Amersham, Maidenhead, Chesham and across Buckinghamshire.

Other services in High Wycombe

More about Industrial door motor replacement · industrial doors in High Wycombe. Last updated 19 October 2026.