The short version
When the original motor on a door in Banbridge (BT32) is no longer made, we fit an equivalent drive with the adapters it needs, set new limits and test closing forces before handover.
- Town
- Banbridge
- Postcode district
- BT32
- Area
- Down
- Guide price
- £845 – £2,395
What's included
- Re-commissioning. The door is fully re-commissioned and tested before it goes back into use.
- Force testing. Closing forces measured to BS EN 12453 where the door closes under power.
- Brake and override. The new drive holds the door securely and can still be opened by hand in a power cut.
- Panel upgrades. New control panels with monitored safety inputs and inverter options.
- Matched drives. Motor torque, speed and mounting matched to the door's weight and size.
Typical scopes of work
- Fitting a centre-mounted motor where an end-mounted replacement would clash with racking beside the door.
- Diagnosing a stalling roller shutter to confirm whether the motor, a broken spring or the control panel is at fault.
- Replacing a motor with a slipping brake on a heavy shutter that creeps down from a part-open position.
Who is responsible for door safety at a site in Banbridge?
In Northern Ireland, the business in control of the premises must keep doors and gates safe under the Workplace Regulations (Northern Ireland) 1993 and maintain work equipment under PUWER (Northern Ireland) 1999, with HSENI as the regulator. The installer who supplies or motorises a door hands over the conformity documents and user instructions; CE marking remains the relevant mark for machinery here.
Keeping your site running during the work
On a first visit we record each door's make, size, control type and condition. That record makes later repairs quicker to price and helps you plan replacements before a door fails.
Guide prices
| Item | Guide price (ex VAT) |
|---|---|
| Motor replacement | £845 – £2,395 |
| Repair visit (attendance and first hour) | £145 – £195 |
Guide prices excluding VAT, which is added at the current rate where it applies. The visit price is agreed before we attend, and any repair is quoted before we carry it out.
Your questions about industrial door motor replacement
How much does an industrial door motor replacement cost in Banbridge?
Our guide price for a replacement motor is £845 to £2,395 ex VAT, supplied and fitted, depending on door size, drive type and whether a new control panel is needed. A diagnostic repair visit in Banbridge costs £145 to £195 ex VAT.
Is the motor really the problem with our door in Banbridge?
Not always. Broken springs, damaged guides, failed panels, safety device faults and supply problems can all look like a failed motor. We diagnose first so you do not pay for a motor that will not fix the fault.
Will our door in Banbridge be tested after the motor is changed?
Yes. We set limits, test the brake and manual override, check safety devices and measure closing forces where required, then give you a written record of the work and test results.
Industrial door motor replacement near Banbridge
Besides Banbridge, we can survey and quote for sites in Craigavon, Lurgan, Portadown and the rest of County Down.
- Industrial door motor replacement in Craigavon
- Industrial door motor replacement in Lurgan
- Industrial door motor replacement in Portadown
- Industrial door motor replacement in Newry
- Industrial door motor replacement in Armagh
- Industrial door motor replacement in Lisburn
Other services in Banbridge
- Hangar and large-span doors
- Impact traffic doors
- Complete loading bays
- Cold store and freezer doors
- PVC strip curtains
- Door automation and controls
- Industrial door installation
- Bollards and door protection
More about Industrial door motor replacement · industrial doors in Banbridge. Last updated 19 October 2026.