Industrial door motor replacement in Stroud

At a glance

Motor replacement in Stroud starts with a chargeable diagnostic visit, then a written fixed price for the new drive and any other repairs the door needs before it goes back into use.

Town: Stroud
Postcode district: GL5
Area: Gloucestershire
Guide price: £845 – £2,395

What the visit covers in Stroud

Fault diagnosis. We check whether the motor, panel, supply or door is at fault before replacing anything.
Brake and override. Brakes tested and manual override checked on every change.
Panel upgrades. New control panels with monitored safety inputs and inverter options.
Re-commissioning. The door is fully re-commissioned and tested before it goes back into use.
Force testing. Closing forces measured to BS EN 12453 where the door closes under power.

Typical scopes of work

Upgrading an old relay control panel to a modern unit with monitored safety edge inputs during a motor change.
Diagnosing a stalling roller shutter to confirm whether the motor, a broken spring or the control panel is at fault.
Re-commissioning a sectional door once a new motor is fitted, including new limit settings and closing force tests.

Powered door rules that apply in Stroud

Stroud is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

Keeping your site running during the work

Service and repair visits in Stroud are booked around your shifts. Doors and shutters are taken out of use one at a time, so the rest of the site keeps working while each one is checked.

Budgeting for industrial door motor replacement in Stroud

Industrial door motor replacement guide prices
Item	Guide price (ex VAT)
Motor replacement	£845 – £2,395
Repair visit (attendance and first hour)	£145 – £195

Guide prices excluding VAT, which is added at the current rate where it applies. The visit price is agreed before we attend, and any repair is quoted before we carry it out.

Industrial door motor replacement in Stroud: your questions

How soon can a door motor in Stroud be replaced?

Many common motors can be sourced quickly, and fitting usually takes a few hours once the drive is on site. Specialist or obsolete motors may need ordering; we tell you the lead time with the quote.

Do you replace motors on any make of door across Gloucestershire?

We replace motors on most makes of roller shutter, sectional, sliding and high-speed door across Gloucestershire, whoever installed them, subject to a suitable drive being available for the door's weight and mounting.

How much does an industrial door motor replacement cost in Stroud?

Our guide price for a replacement motor is £845 to £2,395 ex VAT, supplied and fitted, depending on door size, drive type and whether a new control panel is needed. A diagnostic repair visit in Stroud costs £145 to £195 ex VAT.

Industrial door motor replacement near Stroud

Stroud is in the GL5 postcode district in Gloucestershire. We also cover Gloucester, Cirencester, Cheltenham.

Other services in Stroud

More about Industrial door motor replacement · industrial doors in Stroud. Last updated 19 October 2026.