Industrial door motor replacement in Chiswick

In short

Industrial door motor replacement for roller shutters, sectional doors and sliding doors in Chiswick. We diagnose the fault, match a new drive to the door and re-commission it with safety devices tested.

Town: Chiswick
Postcode district: W4
Area: Greater London
Guide price: £845 – £2,395

What our engineers check and fix

Fault diagnosis. We check whether the motor, panel, supply or door is at fault before replacing anything.
Matched drives. Each replacement drive is selected for the door it will move, not just the old part number.
Written records. You receive written details of the new drive and test results for your records.
Force testing. Where it applies, we measure closing forces to confirm the door is safe after the change.
Obsolete motors. When a motor is discontinued, we fit a suitable alternative and adapt the mounting.

Typical scopes of work

Re-commissioning a sectional door once a new motor is fitted, including new limit settings and closing force tests.
Changing a tubular motor in a small service shutter that overheats and trips during busy periods.
Fitting an equivalent chain-drive motor with adapter plates to a large sectional door whose original drive is discontinued.

Safety law for industrial doors in England

Industrial doors in Chiswick are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.

How the work is organised

Service and repair visits in Chiswick are booked around your shifts. Doors and shutters are taken out of use one at a time, so the rest of the site keeps working while each one is checked.

Guide prices for industrial door motor replacement

Industrial door motor replacement guide prices
Item	Guide price (ex VAT)
Motor replacement	£845 – £2,395
Repair visit (attendance and first hour)	£145 – £195

Guide prices excluding VAT, which is added at the current rate where it applies. The visit price is agreed before we attend, and any repair is quoted before we carry it out.

Industrial door motor replacement in Chiswick: your questions

How much does an industrial door motor replacement cost in Chiswick?

Our guide price for a replacement motor is £845 to £2,395 ex VAT, supplied and fitted, depending on door size, drive type and whether a new control panel is needed. A diagnostic repair visit in Chiswick costs £145 to £195 ex VAT.

Will our door in Chiswick be tested after the motor is changed?

Yes. We set limits, test the brake and manual override, check safety devices and measure closing forces where required, then give you a written record of the work and test results.

Can you replace an obsolete door motor in Chiswick?

Yes. Where the original is no longer made, we fit an equivalent drive with any adapter plates or couplings needed, then set limits and test the safety devices before the door goes back into use.

Industrial door motor replacement near Chiswick

Besides Chiswick, we can survey and quote for sites in Acton, Barnes, Hammersmith and the rest of Greater London.

Other services in Chiswick

More about Industrial door motor replacement · industrial doors in Chiswick. Last updated 19 October 2026.