Industrial door motor replacement in Thamesmead

Quick answer

When the original motor on a door in Thamesmead (SE28) is no longer made, we fit an equivalent drive with the adapters it needs, set new limits and test closing forces before handover.

Town: Thamesmead
Postcode district: SE28
Area: Greater London
Guide price: £845 – £2,395

What our engineers check and fix

Re-commissioning. Limits set, cycles tested and safety devices checked before handover.
Written records. You receive written details of the new drive and test results for your records.
Fault diagnosis. We check whether the motor, panel, supply or door is at fault before replacing anything.
Matched drives. Each replacement drive is selected for the door it will move, not just the old part number.
Obsolete motors. When a motor is discontinued, we fit a suitable alternative and adapt the mounting.

Typical scopes of work

Fitting a centre-mounted motor where an end-mounted replacement would clash with racking beside the door.
Changing a tubular motor in a small service shutter that overheats and trips during busy periods.
Re-commissioning a sectional door once a new motor is fitted, including new limit settings and closing force tests.

Powered door rules that apply in Thamesmead

Thamesmead is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

Access, phasing and timing

On a first visit we record each door's make, size, control type and condition. That record makes later repairs quicker to price and helps you plan replacements before a door fails.

Prices for industrial door motor replacement in Thamesmead

Industrial door motor replacement guide prices
Item	Guide price (ex VAT)
Motor replacement	£845 – £2,395
Repair visit (attendance and first hour)	£145 – £195

Guide prices excluding VAT, which is added at the current rate where it applies. The visit price is agreed before we attend, and any repair is quoted before we carry it out.

Frequently asked questions

Is the motor really the problem with our door in Thamesmead?

Not always. Broken springs, damaged guides, failed panels, safety device faults and supply problems can all look like a failed motor. We diagnose first so you do not pay for a motor that will not fix the fault.

Can you replace an obsolete door motor in Thamesmead?

Yes. Where the original is no longer made, we fit an equivalent drive with any adapter plates or couplings needed, then set limits and test the safety devices before the door goes back into use.

Do you replace motors on any make of door across Greater London?

We replace motors on most makes of roller shutter, sectional, sliding and high-speed door across Greater London, whoever installed them, subject to a suitable drive being available for the door's weight and mounting.

Industrial door motor replacement near Thamesmead

Besides Thamesmead, we can survey and quote for sites in Woolwich, Barking, Welling and the rest of Greater London.

Other services in Thamesmead

More about Industrial door motor replacement · industrial doors in Thamesmead. Last updated 19 October 2026.