Industrial door motor replacement in Hythe

Quick answer

Motor replacement in Hythe starts with a chargeable diagnostic visit, then a written fixed price for the new drive and any other repairs the door needs before it goes back into use.

Town: Hythe
Postcode district: SO45
Area: Hampshire
Guide price: £845 – £2,395

What's included

Obsolete motors. When a motor is discontinued, we fit a suitable alternative and adapt the mounting.
Written records. A record of the work and tests for your maintenance file.
Re-commissioning. Limits set, cycles tested and safety devices checked before handover.
Panel upgrades. Older panels can be replaced at the same time for better reliability and safety.
Force testing. Closing forces measured to BS EN 12453 where the door closes under power.

What this work can involve

Fitting an equivalent chain-drive motor with adapter plates to a large sectional door whose original drive is discontinued.
Replacing a motor with a slipping brake on a heavy shutter that creeps down from a part-open position.
Replacing a burnt-out direct-drive motor on a loading bay door and fitting an inverter control panel at the same time.

Who is responsible for door safety at a site in Hythe?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

How the work is organised

Service and repair visits in Hythe are booked around your shifts. Doors and shutters are taken out of use one at a time, so the rest of the site keeps working while each one is checked.

Prices for industrial door motor replacement in Hythe

Industrial door motor replacement guide prices
Item	Guide price (ex VAT)
Motor replacement	£845 – £2,395
Repair visit (attendance and first hour)	£145 – £195

Guide prices excluding VAT, which is added at the current rate where it applies. The visit price is agreed before we attend, and any repair is quoted before we carry it out.

Frequently asked questions

Can you replace an obsolete door motor in Hythe?

Yes. Where the original is no longer made, we fit an equivalent drive with any adapter plates or couplings needed, then set limits and test the safety devices before the door goes back into use.

Should we replace the whole door instead of the motor in Hythe?

If the door itself is old, damaged or needs several other repairs, replacement can be better value. We price both where it makes sense, so you can weigh up the cost and remaining life honestly.

Is the motor really the problem with our door in Hythe?

Not always. Broken springs, damaged guides, failed panels, safety device faults and supply problems can all look like a failed motor. We diagnose first so you do not pay for a motor that will not fix the fault.

Industrial door motor replacement near Hythe

Besides Hythe, we can survey and quote for sites in Southampton, Totton, Eastleigh and the rest of Hampshire.

Other services in Hythe

More about Industrial door motor replacement · industrial doors in Hythe. Last updated 19 October 2026.