Industrial door motor replacement in Lerwick

At a glance

Motor replacement in Lerwick starts with a chargeable diagnostic visit, then a written fixed price for the new drive and any other repairs the door needs before it goes back into use.

Town: Lerwick
Postcode district: ZE1
Area: Highlands and Islands
Guide price: £845 – £2,395

How we look after doors in Lerwick

Panel upgrades. Older panels can be replaced at the same time for better reliability and safety.
Fault diagnosis. We check whether the motor, panel, supply or door is at fault before replacing anything.
Re-commissioning. The door is fully re-commissioned and tested before it goes back into use.
Matched drives. Each replacement drive is selected for the door it will move, not just the old part number.
Written records. You receive written details of the new drive and test results for your records.

Examples of work we can quote for

Fitting a centre-mounted motor where an end-mounted replacement would clash with racking beside the door.
Changing a tubular motor in a small service shutter that overheats and trips during busy periods.
Diagnosing a stalling roller shutter to confirm whether the motor, a broken spring or the control panel is at fault.

Safety law for industrial doors in Scotland

Industrial doors in Lerwick are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.

Planning the work around your site

Before work starts we send a method statement and risk assessment, confirm who on site will be our contact and agree where materials and access equipment will go. On shared industrial estates that can mean booking yard space with the landlord.

Guide prices for industrial door motor replacement

Industrial door motor replacement guide prices
Item	Guide price (ex VAT)
Motor replacement	£845 – £2,395
Repair visit (attendance and first hour)	£145 – £195

Guide prices excluding VAT, which is added at the current rate where it applies. The visit price is agreed before we attend, and any repair is quoted before we carry it out.

Guide prices apply to mainland UK sites. For Lerwick, travel and access costs are added and shown in your written quote.

Industrial door motor replacement in Lerwick: your questions

Is the motor really the problem with our door in Lerwick?

Not always. Broken springs, damaged guides, failed panels, safety device faults and supply problems can all look like a failed motor. We diagnose first so you do not pay for a motor that will not fix the fault.

Can you replace an obsolete door motor in Lerwick?

Yes. Where the original is no longer made, we fit an equivalent drive with any adapter plates or couplings needed, then set limits and test the safety devices before the door goes back into use.

Will our door in Lerwick be tested after the motor is changed?

Yes. We set limits, test the brake and manual override, check safety devices and measure closing forces where required, then give you a written record of the work and test results.

Industrial door motor replacement: other towns we cover

Lerwick (ZE1) is covered by arrangement. Travel and access costs for island and remote sites are added and shown in your written quote.

Other services in Lerwick

More about Industrial door motor replacement · industrial doors in Lerwick. Last updated 19 October 2026.