Industrial door motor replacement in Redhill

The short version

Door stalling, grinding or creeping down at your Redhill site? It may need a new motor, or the motor may be suffering from a fault elsewhere. We diagnose which it is before recommending anything.

Town: Redhill
Postcode district: RH1
Area: Surrey
Guide price: £845 – £2,395

What our engineers check and fix

Obsolete motors. When a motor is discontinued, we fit a suitable alternative and adapt the mounting.
Re-commissioning. Limits set, cycles tested and safety devices checked before handover.
Fault diagnosis. We check whether the motor, panel, supply or door is at fault before replacing anything.
Force testing. Where it applies, we measure closing forces to confirm the door is safe after the change.
Written records. You receive written details of the new drive and test results for your records.

Examples of work we can quote for

Re-commissioning a sectional door once a new motor is fitted, including new limit settings and closing force tests.
Upgrading an old relay control panel to a modern unit with monitored safety edge inputs during a motor change.
Changing a tubular motor in a small service shutter that overheats and trips during busy periods.

Who is responsible for door safety at a site in Redhill?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

How the work is organised

On a first visit we record each door's make, size, control type and condition. That record makes later repairs quicker to price and helps you plan replacements before a door fails.

Prices for industrial door motor replacement in Redhill

Industrial door motor replacement guide prices
Item	Guide price (ex VAT)
Motor replacement	£845 – £2,395
Repair visit (attendance and first hour)	£145 – £195

Guide prices excluding VAT, which is added at the current rate where it applies. The visit price is agreed before we attend, and any repair is quoted before we carry it out.

Your questions about industrial door motor replacement

Is the motor really the problem with our door in Redhill?

Not always. Broken springs, damaged guides, failed panels, safety device faults and supply problems can all look like a failed motor. We diagnose first so you do not pay for a motor that will not fix the fault.

Can you replace an obsolete door motor in Redhill?

Yes. Where the original is no longer made, we fit an equivalent drive with any adapter plates or couplings needed, then set limits and test the safety devices before the door goes back into use.

Will our door in Redhill be tested after the motor is changed?

Yes. We set limits, test the brake and manual override, check safety devices and measure closing forces where required, then give you a written record of the work and test results.

Industrial door motor replacement near Redhill

Our teams cover Redhill (RH1) and nearby Reigate, Horley, Caterham, along with the rest of Surrey.

Other services in Redhill

More about Industrial door motor replacement · industrial doors in Redhill. Last updated 19 October 2026.