Industrial door motor replacement in Stourport-on-Severn

At a glance

Motor replacement in Stourport-on-Severn starts with a chargeable diagnostic visit, then a written fixed price for the new drive and any other repairs the door needs before it goes back into use.

Town: Stourport-on-Severn
Postcode district: DY13
Area: Worcestershire
Guide price: £845 – £2,395

How we look after doors in Stourport-on-Severn

Panel upgrades. New control panels with monitored safety inputs and inverter options.
Fault diagnosis. We check whether the motor, panel, supply or door is at fault before replacing anything.
Re-commissioning. Limits set, cycles tested and safety devices checked before handover.
Written records. A record of the work and tests for your maintenance file.
Force testing. Where it applies, we measure closing forces to confirm the door is safe after the change.

Jobs we can carry out

Fitting a centre-mounted motor where an end-mounted replacement would clash with racking beside the door.
Upgrading an old relay control panel to a modern unit with monitored safety edge inputs during a motor change.
Replacing a burnt-out direct-drive motor on a loading bay door and fitting an inverter control panel at the same time.

Who is responsible for door safety at a site in Stourport-on-Severn?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Access, phasing and timing

Service and repair visits in Stourport-on-Severn are booked around your shifts. Doors and shutters are taken out of use one at a time, so the rest of the site keeps working while each one is checked.

Guide prices

Industrial door motor replacement guide prices
Item	Guide price (ex VAT)
Motor replacement	£845 – £2,395
Repair visit (attendance and first hour)	£145 – £195

Guide prices excluding VAT, which is added at the current rate where it applies. The visit price is agreed before we attend, and any repair is quoted before we carry it out.

Questions from businesses in Stourport-on-Severn

How much does an industrial door motor replacement cost in Stourport-on-Severn?

Our guide price for a replacement motor is £845 to £2,395 ex VAT, supplied and fitted, depending on door size, drive type and whether a new control panel is needed. A diagnostic repair visit in Stourport-on-Severn costs £145 to £195 ex VAT.

Should we replace the whole door instead of the motor in Stourport-on-Severn?

If the door itself is old, damaged or needs several other repairs, replacement can be better value. We price both where it makes sense, so you can weigh up the cost and remaining life honestly.

Will our door in Stourport-on-Severn be tested after the motor is changed?

Yes. We set limits, test the brake and manual override, check safety devices and measure closing forces where required, then give you a written record of the work and test results.

Industrial door motor replacement near Stourport-on-Severn

Besides Stourport-on-Severn, we can survey and quote for sites in Kidderminster, Droitwich, Bromsgrove and the rest of Worcestershire.

Other services in Stourport-on-Severn

More about Industrial door motor replacement · industrial doors in Stourport-on-Severn. Last updated 19 October 2026.