Quick answer
Fire shutters in Broadstairs (CT10) supplied and fitted with their control panel, warning devices and alarm release, then drop-tested and handed over with commissioning records for your fire safety file.
- Town
- Broadstairs
- Postcode district
- CT10
- Area
- Kent
- Survey
- Free for new installations
Options that matter on site
- Battery back-up. Batteries keep the closing sequence under control even if mains power is lost.
- Fail-safe closing. If the alarm sounds or the power goes, the shutter drops at a governed speed and closes the opening.
- Daily-use models. Motorised fire shutters that also work as everyday doors.
- Alarm interface. We agree the cause-and-effect with your alarm contractor and prove the release at commissioning.
- Warning devices. Audible and visual warnings let people know the shutter is about to close.
Jobs we can carry out
- Fitting battery back-up, a beacon and a sounder to a new fire shutter on a service corridor.
- Coordinating commissioning with the fire alarm contractor so the shutter release is proven during the same visit.
- Replacing an obsolete kitchen servery fire shutter with a new shutter released by the fire alarm panel.
Fire shutter law in England
A fire shutter only does its job if it closes when needed. Under the Regulatory Reform (Fire Safety) Order 2005, the responsible person must keep fire safety equipment maintained in efficient working order, and keeping test records is the usual way to show it. Shutters must also stay as the manufacturer tested and certified them, so repairs should use the right parts. In Broadstairs, the enforcing authority is the local fire and rescue authority.
Keeping your site running during the work
Sites in and around Broadstairs vary from tight trade counters to large distribution yards. The survey records access for our vehicle and platform, overhead obstructions and floor condition so the installation day runs without surprises.
Guide prices
| Item | Guide price (ex VAT) |
|---|---|
| Fire shutter, single, with control panel and fail-safe closing | £4,495 – £11,995 |
| Fire shutter service with drop test, per shutter | £125 – £265 |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Frequently asked questions
How much does a fire shutter cost in Broadstairs?
Our guide price for a single fire shutter with control panel and fail-safe closing is £4,495 to £11,995 ex VAT, supplied and fitted. Size, rating and alarm interface set the final figure, which we confirm in writing after a free survey in Broadstairs.
Can you link a fire shutter to our existing alarm in Broadstairs?
Usually, yes. We work with your fire alarm contractor to agree the cause-and-effect and the interface, designed to BS 7273-4, and prove the shutter closes on the alarm signal at commissioning.
Do you service fire shutters across Kent?
Yes. We service and drop-test fire shutters across Kent, including most makes we did not install, and provide a written report for each shutter. Servicing visits are chargeable at a fixed price per shutter.
Fire shutters near Broadstairs
Besides Broadstairs, we can survey and quote for sites in Ramsgate, Margate, Deal and the rest of Kent.
- Fire shutters in Ramsgate
- Fire shutters in Margate
- Fire shutters in Deal
- Fire shutters in Herne Bay
- Fire shutters in Canterbury
- Fire shutters in Dover
Other services in Broadstairs
- Impact traffic doors
- Steel personnel and fire exit doors
- Door safety upgrades
- High-speed doors
- Dock leveller and loading bay repairs
- Industrial door replacement
- Cold store and freezer doors
- Insulated roller shutter doors
More about Fire shutters · industrial doors in Broadstairs. Last updated 19 October 2026.