Hangar and large-span doors in Uxbridge

The short version

If your sliding hangar doors in Uxbridge have become heavy, noisy or hard to move, we can renew wheels, guides and drives, or replace the doors with a modern large-span system if refurbishment no longer makes sense.

Town: Uxbridge
Postcode district: UB8
Area: Greater London
Survey: Free for new installations

What to specify

Drives and controls. Powered leaves with controls to suit the site, plus a way to move the door if power is lost.
Wind resistance. Leaves, guides and fixings designed for the wind load on the closed door.
Load path. Bottom-rolling on floor rails or top-hung from the structure, agreed with your engineer.
Vertical-lift fabric. Tall openings with little side space can use a fabric door that lifts and folds into a compact stack.
Designed per opening. No off-the-shelf sizes: every large door is designed for its building and location.

What this work can involve

Recladding the leaves of a large sliding door with a corrosion-resistant finish suited to an exposed site.
Adding warning beacons, sounders and photocells to an older powered large-span door as part of a site risk assessment review.
Designing multi-leaf sliding doors, with a tail-fin cut-out where needed, for a hangar or large-span maintenance building.

Powered door rules that apply in Uxbridge

Uxbridge is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

Keeping your site running during the work

Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.

Guide prices for hangar and large-span doors

Hangar and large-span doors guide prices
Item	Guide price (ex VAT)
Hangar and large-span doors	on survey (typically from £39,995)

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about hangar and large-span doors

How much does a hangar door cost in Uxbridge?

Hangar and large-span doors are priced on survey because each is designed for its opening and structure. Typical projects start from around £39,995 ex VAT. After surveying your site in Uxbridge, we confirm a fixed price in writing.

Can a large door at our Uxbridge site be operated without power?

Most powered large doors include a manual or emergency means of operation for power failures. How it works depends on the door type and size, and we explain it at handover and in the user instructions.

Do you service large doors across Greater London?

Yes. We service and repair hangar and large-span doors across Greater London, including running gear, drives, controls and safety devices. Service and repair visits are chargeable and quoted before work starts.

Hangar and large-span doors near Uxbridge

Besides Uxbridge, we can survey and quote for sites in Ruislip, Hayes, Gerrards Cross and the rest of Greater London.

Other services in Uxbridge

More about Hangar and large-span doors · industrial doors in Uxbridge. Last updated 19 October 2026.