Quick answer
Large openings at sites in Ross-on-Wye (HR9) need doors engineered for wind, weight and structure. We specify the running gear, drives and safety devices to suit, then install and commission the complete door.
- Town
- Ross-on-Wye
- Postcode district
- HR9
- Area
- Herefordshire
- Survey
- Free for new installations
Options that matter on site
- Load path. Bottom-rolling on floor rails or top-hung from the structure, agreed with your engineer.
- Designed per opening. No off-the-shelf sizes: every large door is designed for its building and location.
- Refurbishment. Sound but tired doors can be brought back with new running gear, drives and safety devices.
- Vertical-lift fabric. Reinforced fabric curtains with wind bars that fold up beneath the lintel.
- Multi-leaf sliding. Leaves stacking to one or both sides, or into door pockets, with no headroom needed.
Jobs we can carry out
- Adding warning beacons, sounders and photocells to an older powered large-span door as part of a site risk assessment review.
- Surveying and specifying a very wide sliding or folding door for a building that houses large plant and machinery.
- Coordinating floor rail installation with the groundworks contractor before new large-span door leaves arrive on site.
Powered door rules that apply in Ross-on-Wye
Ross-on-Wye is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.
Access, phasing and timing
Where a door is being replaced, the opening has to be made secure at the end of each day. We plan strip-out, any new framing and the new door so the gap is never left open overnight unless you have agreed temporary measures.
Budgeting for hangar and large-span doors in Ross-on-Wye
| Item | Guide price (ex VAT) |
|---|---|
| Hangar and large-span doors | on survey (typically from £39,995) |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Frequently asked questions
Can you refurbish our existing hangar doors in Ross-on-Wye?
Often, yes. If the leaves are sound, we renew wheels, guides, drives, cladding and safety devices. Where distortion or corrosion is severe, we explain why replacement may be better value.
How long would a large-span door installation take in Ross-on-Wye?
After design and manufacture, installation typically takes from several days to a few weeks depending on the number of leaves and any structural work. The full programme is set out with the quote.
How much does a hangar door cost in Ross-on-Wye?
Hangar and large-span doors are priced on survey because each is designed for its opening and structure. Typical projects start from around £39,995 ex VAT. After surveying your site in Ross-on-Wye, we confirm a fixed price in writing.
Hangar and large-span doors near Ross-on-Wye
Besides Ross-on-Wye, we can survey and quote for sites in Ledbury, Hereford, Gloucester and the rest of Herefordshire.
- Hangar and large-span doors in Ledbury
- Hangar and large-span doors in Hereford
- Hangar and large-span doors in Gloucester
- Hangar and large-span doors in Malvern
- Hangar and large-span doors in Tewkesbury
- Hangar and large-span doors in Stroud
Other services in Ross-on-Wye
- PVC strip curtains
- Door automation and controls
- Industrial door installation
- Steel personnel and fire exit doors
- Insulated roller shutter doors
- Bollards and door protection
- Dock shelters and seals
- Fire shutters
More about Hangar and large-span doors · industrial doors in Ross-on-Wye. Last updated 19 October 2026.