In short
From a single wide plant-shed door to a full hangar frontage, we can design and fit large-span doors in Lichfield, coordinating floor rails, steelwork and controls so the whole opening works as one system.
- Town
- Lichfield
- Postcode district
- WS13
- Area
- Staffordshire
- Survey
- Free for new installations
What we fit in Lichfield
- Wind resistance. Leaves, guides and fixings designed for the wind load on the closed door.
- Designed per opening. No off-the-shelf sizes: every large door is designed for its building and location.
- Multi-leaf sliding. Leaves stacking to one or both sides, or into door pockets, with no headroom needed.
- Drives and controls. Powered leaves with controls to suit the site, plus a way to move the door if power is lost.
- Vertical-lift fabric. Reinforced fabric curtains with wind bars that fold up beneath the lintel.
What this work can involve
- Refurbishing manual large-span sliding doors with new bottom wheels, top guides and an electric drive unit on each leaf.
- Adding warning beacons, sounders and photocells to an older powered large-span door as part of a site risk assessment review.
- Installing heavy-duty sectional doors with wind-resistant panels across the frontage of a bus or coach garage.
Powered door rules that apply in Lichfield
Lichfield is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.
Access, phasing and timing
Sites in and around Lichfield vary from tight trade counters to large distribution yards. The survey records access for our vehicle and platform, overhead obstructions and floor condition so the installation day runs without surprises.
Prices for hangar and large-span doors in Lichfield
| Item | Guide price (ex VAT) |
|---|---|
| Hangar and large-span doors | on survey (typically from £39,995) |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Your questions about hangar and large-span doors
Do you service large doors across Staffordshire?
Yes. We service and repair hangar and large-span doors across Staffordshire, including running gear, drives, controls and safety devices. Service and repair visits are chargeable and quoted before work starts.
Which hangar door type would suit our building in Lichfield?
It depends on headroom, side space, structure and how often the door moves. Sliding doors need side space, vertical-lift fabric doors need headroom, and large sectional doors suit big but not extreme openings. We recommend after survey.
How much does a hangar door cost in Lichfield?
Hangar and large-span doors are priced on survey because each is designed for its opening and structure. Typical projects start from around £39,995 ex VAT. After surveying your site in Lichfield, we confirm a fixed price in writing.
Hangar and large-span doors near Lichfield
Lichfield is in the WS13 postcode district in Staffordshire. We also cover Burntwood, Tamworth, Aldridge.
- Hangar and large-span doors in Burntwood
- Hangar and large-span doors in Tamworth
- Hangar and large-span doors in Aldridge
- Hangar and large-span doors in Rugeley
- Hangar and large-span doors in Sutton Coldfield
- Hangar and large-span doors in Cannock
Other services in Lichfield
- Door safety upgrades
- Steel personnel and fire exit doors
- Fire shutters
- Dock shelters and seals
- Dock leveller and loading bay repairs
- Industrial door installation
- High-speed doors
- Bollards and door protection
More about Hangar and large-span doors · industrial doors in Lichfield. Last updated 19 October 2026.