Industrial roller shutters in Aberdeen

At a glance

We can fit new steel roller shutters and replace old, damaged ones in Aberdeen and across Aberdeen and Aberdeenshire, with strip-out, disposal and any new framing priced up front after a free site survey.

Town: Aberdeen
Postcode district: AB10
Area: Aberdeen and Aberdeenshire
Survey: Free for new installations

Options for industrial roller shutters in Aberdeen

Manual override. If the power fails, the shutter can still be wound open by hand.
Safety devices. Safety edges, photocells and anti-fall devices on powered shutters.
Compact coil. Nothing runs back under the roof: the shutter coils up neatly above the lintel.
Colour finishes. Leave it galvanised or choose a colour that matches the building.
Steel curtains. Galvanised steel laths in gauges to suit the width and the level of abuse expected.

What this work can involve

Converting hand-chained shutters on a storage unit to electric operation with key-switch controls and safety edges.
Fitting a galvanised roller shutter to a new bin store or recycling compound, with a lockable bottom rail.
Renewing the bottom rail, floor seal and end locks on a roller shutter that jams in its guides.

Safety law for industrial doors in Scotland

Industrial doors in Aberdeen are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.

How the work is organised

For busy sites in Aberdeen and Aberdeenshire the work can be split across visits — preparation and framing first, door installation and commissioning second — so the opening is only out of action for the shortest time.

Prices for industrial roller shutters in Aberdeen

Industrial roller shutters guide prices
Item	Guide price (ex VAT)
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Manual-to-electric conversion	£1,195 – £3,195
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Questions from businesses in Aberdeen

Does an electric roller shutter at our Aberdeen site need safety devices?

It depends on the risk assessment. A hold-to-run shutter in view of the operator may need little more than force limiting, while one that closes automatically typically needs a safety edge and photocells, tested to BS EN 12453.

Do you remove old shutters at sites in Aberdeen?

Yes. Strip-out and disposal of the old shutter is shown as a separate line in the quote, along with any repairs to the opening. The old door normally comes out as part of the same visit that fits the new one.

How quickly can a roller shutter be fitted in Aberdeen?

Once the made-to-measure shutter arrives, most single doors are fitted and commissioned in a day. The manufacturer's lead time is confirmed with your quote, and installation is booked around your opening hours.

Industrial roller shutters near Aberdeen

Our teams cover Aberdeen (AB10) and nearby Stonehaven, Inverurie, Peterhead, along with the rest of Aberdeen and Aberdeenshire.

Other services in Aberdeen

More about Industrial roller shutters · industrial doors in Aberdeen. Last updated 19 October 2026.