The short version
Industrial roller shutters for warehouses, yards, workshops and stores in Bedfordshire. We survey the opening, recommend the lath, drive and mounting position, then fit and commission the shutter in a day in most cases.
- Area
- Bedfordshire
- Nation
- England
- Main town
- Luton
- Survey
- Free for new installations
What we fit in Bedfordshire
- Security. Bottom-rail locks and shoot bolts, with LPS 1175 rated products available.
- Compact coil. Nothing runs back under the roof: the shutter coils up neatly above the lintel.
- Safety devices. Safety edges, photocells and anti-fall devices on powered shutters.
- Colour finishes. Leave it galvanised or choose a colour that matches the building.
- Manual or electric. Hand-operated for occasional use, electric for anything opened through the working day.
What this work can involve
- Installing perforated shutters across a covered loading area so the space stays ventilated and visible when locked.
- Replacing a run of rusted shutters on a block of trade units, finished in one matching RAL colour.
- Converting hand-chained shutters on a storage unit to electric operation with key-switch controls and safety edges.
Powered door rules that apply in Bedfordshire
Bedfordshire is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.
Access, phasing and timing
Downtime matters on a working site, so the programme is set around your shifts. For a single door the opening is usually needed for a day; multi-door jobs are done one bay at a time so deliveries keep moving.
Budgeting for industrial roller shutters in Bedfordshire
| Item | Guide price (ex VAT) |
|---|---|
| Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m) | £2,395 – £5,495 |
| Manual-to-electric conversion | £1,195 – £3,195 |
| Strip-out and disposal on replacement | £345 – £1,195 per door |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Your questions about industrial roller shutters
How quickly can a roller shutter be fitted in Bedfordshire?
Once the made-to-measure shutter arrives, most single doors are fitted and commissioned in a day. The manufacturer's lead time is confirmed with your quote, and installation is booked around your opening hours.
Does an electric roller shutter at our Bedfordshire site need safety devices?
It depends on the risk assessment. A hold-to-run shutter in view of the operator may need little more than force limiting, while one that closes automatically typically needs a safety edge and photocells, tested to BS EN 12453.
Do you repair roller shutters across the East of England?
Yes. We repair most makes of roller shutter across the East of England, including motors, laths, guides, springs and bottom rails. Repair visits are chargeable and priced in advance; we quote before any larger repair.
Towns in Bedfordshire we cover
We cover 5 towns in Bedfordshire for industrial roller shutters, including Luton, Bedford, Dunstable, Leighton Buzzard.
Other services in Bedfordshire
- Fire shutters
- Dock levellers
- Door automation and controls
- Complete loading bays
- Sliding and folding industrial doors
- Dock leveller and loading bay repairs
- Bollards and door protection
- Industrial door replacement
More about Industrial roller shutters. Last updated 19 October 2026.