Industrial roller shutters in Fishponds

At a glance

Industrial roller shutters for warehouses, yards, workshops and stores in Fishponds. We survey the opening, recommend the lath, drive and mounting position, then fit and commission the shutter in a day in most cases.

Town: Fishponds
Postcode district: BS16
Area: Bristol
Survey: Free for new installations

What to specify

Manual override. If the power fails, the shutter can still be wound open by hand.
Colour finishes. Plain galvanised or powder-coated to a RAL colour.
Safety devices. Motorised shutters get the safety functions their risk assessment needs before handover.
Manual or electric. Push-up, chain hoist or motorised operation depending on how often the door opens.
Mounting options. Fixed inside, in the reveal or face-fixed outside with a protective hood.

Examples of work we can quote for

Supplying a security-rated roller shutter, installed to the certified specification, to meet an insurer's requirement for a high-value stockroom.
Installing perforated shutters across a covered loading area so the space stays ventilated and visible when locked.
Renewing the bottom rail, floor seal and end locks on a roller shutter that jams in its guides.

Who is responsible for door safety at a site in Fishponds?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Planning the work around your site

Most installations in Fishponds can be phased so part of the site keeps working. We agree access routes, exclusion zones and any temporary security with you before the team arrives, and can work early mornings, evenings or weekends where the business needs it.

Prices for industrial roller shutters in Fishponds

Industrial roller shutters guide prices
Item	Guide price (ex VAT)
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Manual-to-electric conversion	£1,195 – £3,195
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Frequently asked questions

Do you remove old shutters at sites in Fishponds?

Yes. Strip-out and disposal of the old shutter is shown as a separate line in the quote, along with any repairs to the opening. The old door normally comes out as part of the same visit that fits the new one.

Does an electric roller shutter at our Fishponds site need safety devices?

It depends on the risk assessment. A hold-to-run shutter in view of the operator may need little more than force limiting, while one that closes automatically typically needs a safety edge and photocells, tested to BS EN 12453.

Can you convert our manual shutter in Fishponds to electric?

Often, yes, if the barrel, curtain and guides are in good condition. Our guide price for a conversion is £1,195 to £3,195 ex VAT. We become responsible for the conformity paperwork on the converted door and fit the safety devices it needs.

Industrial roller shutters near Fishponds

Working in Fishponds? We also take on jobs in Kingswood, Brislington, Bristol and across Bristol.

Other services in Fishponds

More about Industrial roller shutters · industrial doors in Fishponds. Last updated 19 October 2026.