Industrial roller shutters in Hartlepool

The short version

We can fit new steel roller shutters and replace old, damaged ones in Hartlepool and across County Durham, with strip-out, disposal and any new framing priced up front after a free site survey.

Town: Hartlepool
Postcode district: TS24
Area: County Durham
Survey: Free for new installations

What to specify

Colour finishes. Plain galvanised or powder-coated to a RAL colour.
Manual or electric. Push-up, chain hoist or motorised operation depending on how often the door opens.
Security. Locking options for everyday security, and certified rated shutters where insurers ask for them.
Safety devices. Motorised shutters get the safety functions their risk assessment needs before handover.
Compact coil. Nothing runs back under the roof: the shutter coils up neatly above the lintel.

Examples of work we can quote for

Installing perforated shutters across a covered loading area so the space stays ventilated and visible when locked.
Replacing a vehicle-damaged shutter in a trade yard with a heavier-gauge curtain and guide-rail protection.
Supplying a security-rated roller shutter, installed to the certified specification, to meet an insurer's requirement for a high-value stockroom.

Who is responsible for door safety at a site in Hartlepool?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Keeping your site running during the work

Downtime matters on a working site, so the programme is set around your shifts. For a single door the opening is usually needed for a day; multi-door jobs are done one bay at a time so deliveries keep moving.

Guide prices

Industrial roller shutters guide prices
Item	Guide price (ex VAT)
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Manual-to-electric conversion	£1,195 – £3,195
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Questions from businesses in Hartlepool

Do you remove old shutters at sites in Hartlepool?

Yes. Strip-out and disposal of the old shutter is shown as a separate line in the quote, along with any repairs to the opening. The old door normally comes out as part of the same visit that fits the new one.

Does an electric roller shutter at our Hartlepool site need safety devices?

It depends on the risk assessment. A hold-to-run shutter in view of the operator may need little more than force limiting, while one that closes automatically typically needs a safety edge and photocells, tested to BS EN 12453.

Can you convert our manual shutter in Hartlepool to electric?

Often, yes, if the barrel, curtain and guides are in good condition. Our guide price for a conversion is £1,195 to £3,195 ex VAT. We become responsible for the conformity paperwork on the converted door and fit the safety devices it needs.

Industrial roller shutters near Hartlepool

Besides Hartlepool, we can survey and quote for sites in Peterlee, Billingham, Middlesbrough and the rest of County Durham.

Other services in Hartlepool

More about Industrial roller shutters · industrial doors in Hartlepool. Last updated 19 October 2026.