Industrial roller shutters in New Milton

The short version

Need a tough, space-saving door for a unit in New Milton? Single-skin steel roller shutters coil neatly above the opening and can be manual or electric, with security upgrades where your insurer requires them.

Town: New Milton
Postcode district: BH25
Area: Hampshire
Survey: Free for new installations

Options that matter on site

Security. Locking options for everyday security, and certified rated shutters where insurers ask for them.
Mounting options. We mount the shutter wherever it fits most easily, including outside with a hood over the coil.
Manual or electric. Push-up, chain hoist or motorised operation depending on how often the door opens.
Compact coil. The curtain winds onto a barrel above the opening, leaving floor and roof space free.
Colour finishes. Plain galvanised or powder-coated to a RAL colour.

Examples of work we can quote for

Replacing a run of rusted shutters on a block of trade units, finished in one matching RAL colour.
Replacing a vehicle-damaged shutter in a trade yard with a heavier-gauge curtain and guide-rail protection.
Converting hand-chained shutters on a storage unit to electric operation with key-switch controls and safety edges.

Safety law for industrial doors in England

Industrial doors in New Milton are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.

Planning the work around your site

Most installations in New Milton can be phased so part of the site keeps working. We agree access routes, exclusion zones and any temporary security with you before the team arrives, and can work early mornings, evenings or weekends where the business needs it.

Prices for industrial roller shutters in New Milton

Industrial roller shutters guide prices
Item	Guide price (ex VAT)
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Manual-to-electric conversion	£1,195 – £3,195
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Industrial roller shutters in New Milton: your questions

Does an electric roller shutter at our New Milton site need safety devices?

It depends on the risk assessment. A hold-to-run shutter in view of the operator may need little more than force limiting, while one that closes automatically typically needs a safety edge and photocells, tested to BS EN 12453.

Can you convert our manual shutter in New Milton to electric?

Often, yes, if the barrel, curtain and guides are in good condition. Our guide price for a conversion is £1,195 to £3,195 ex VAT. We become responsible for the conformity paperwork on the converted door and fit the safety devices it needs.

Do you remove old shutters at sites in New Milton?

Yes. Strip-out and disposal of the old shutter is shown as a separate line in the quote, along with any repairs to the opening. The old door normally comes out as part of the same visit that fits the new one.

Industrial roller shutters near New Milton

Besides New Milton, we can survey and quote for sites in Christchurch, Bournemouth, Hythe and the rest of Hampshire.

Other services in New Milton

More about Industrial roller shutters · industrial doors in New Milton. Last updated 19 October 2026.