Industrial roller shutters in Chorley

At a glance

Industrial roller shutters for warehouses, yards, workshops and stores in Chorley. We survey the opening, recommend the lath, drive and mounting position, then fit and commission the shutter in a day in most cases.

Town: Chorley
Postcode district: PR7
Area: Lancashire
Survey: Free for new installations

What to specify

Compact coil. Nothing runs back under the roof: the shutter coils up neatly above the lintel.
Mounting options. We mount the shutter wherever it fits most easily, including outside with a hood over the coil.
Manual override. If the power fails, the shutter can still be wound open by hand.
Steel curtains. Galvanised steel laths in gauges to suit the width and the level of abuse expected.
Security. Bottom-rail locks and shoot bolts, with LPS 1175 rated products available.

Typical scopes of work

Supplying a security-rated roller shutter, installed to the certified specification, to meet an insurer's requirement for a high-value stockroom.
Renewing the bottom rail, floor seal and end locks on a roller shutter that jams in its guides.
Fitting a galvanised roller shutter to a new bin store or recycling compound, with a lockable bottom rail.

Powered door rules that apply in Chorley

Chorley is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

Keeping your site running during the work

If your premises are leased, check whether the landlord needs to approve the work. We can provide drawings and product data for the landlord or managing agent before the order is placed.

Guide prices

Industrial roller shutters guide prices
Item	Guide price (ex VAT)
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Manual-to-electric conversion	£1,195 – £3,195
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Questions from businesses in Chorley

Does an electric roller shutter at our Chorley site need safety devices?

It depends on the risk assessment. A hold-to-run shutter in view of the operator may need little more than force limiting, while one that closes automatically typically needs a safety edge and photocells, tested to BS EN 12453.

Can you supply security-rated shutters in Chorley?

Yes. Where your insurer asks for a rating such as LPS 1175, we supply a shutter whose manufacturer holds that certification and install it to the certified specification. Check the exact rating your insurer wants before ordering.

Do you remove old shutters at sites in Chorley?

Yes. Strip-out and disposal of the old shutter is shown as a separate line in the quote, along with any repairs to the opening. The old door normally comes out as part of the same visit that fits the new one.

Industrial roller shutters near Chorley

Working in Chorley? We also take on jobs in Leyland, Darwen, Wigan and across Lancashire.

Other services in Chorley

More about Industrial roller shutters · industrial doors in Chorley. Last updated 19 October 2026.