Industrial roller shutters in Morecambe

In short

From bin stores to goods-in openings, we can install industrial roller shutters at premises in Morecambe, set up powered shutters to BS EN 12453 and leave you with the paperwork for your files.

Town: Morecambe
Postcode district: LA4
Area: Lancashire
Survey: Free for new installations

What to specify

Compact coil. Nothing runs back under the roof: the shutter coils up neatly above the lintel.
Colour finishes. Plain galvanised or powder-coated to a RAL colour.
Manual or electric. Push-up, chain hoist or motorised operation depending on how often the door opens.
Security. Locking options for everyday security, and certified rated shutters where insurers ask for them.
Mounting options. Fixed inside, in the reveal or face-fixed outside with a protective hood.

Jobs we can carry out

Fitting a galvanised roller shutter to a new bin store or recycling compound, with a lockable bottom rail.
Renewing the bottom rail, floor seal and end locks on a roller shutter that jams in its guides.
Replacing a vehicle-damaged shutter in a trade yard with a heavier-gauge curtain and guide-rail protection.

Who is responsible for door safety at a site in Morecambe?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Planning the work around your site

For busy sites in Lancashire the work can be split across visits — preparation and framing first, door installation and commissioning second — so the opening is only out of action for the shortest time.

Budgeting for industrial roller shutters in Morecambe

Industrial roller shutters guide prices
Item	Guide price (ex VAT)
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Manual-to-electric conversion	£1,195 – £3,195
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Questions from businesses in Morecambe

Does an electric roller shutter at our Morecambe site need safety devices?

It depends on the risk assessment. A hold-to-run shutter in view of the operator may need little more than force limiting, while one that closes automatically typically needs a safety edge and photocells, tested to BS EN 12453.

Do you remove old shutters at sites in Morecambe?

Yes. Strip-out and disposal of the old shutter is shown as a separate line in the quote, along with any repairs to the opening. The old door normally comes out as part of the same visit that fits the new one.

Can you convert our manual shutter in Morecambe to electric?

Often, yes, if the barrel, curtain and guides are in good condition. Our guide price for a conversion is £1,195 to £3,195 ex VAT. We become responsible for the conformity paperwork on the converted door and fit the safety devices it needs.

Industrial roller shutters near Morecambe

Morecambe is in the LA4 postcode district in Lancashire. We also cover Lancaster, Fleetwood, Thornton-Cleveleys.

Other services in Morecambe

More about Industrial roller shutters · industrial doors in Morecambe. Last updated 19 October 2026.