Industrial roller shutters in Grimsby

Quick answer

Industrial roller shutters for warehouses, yards, workshops and stores in Grimsby. We survey the opening, recommend the lath, drive and mounting position, then fit and commission the shutter in a day in most cases.

Town: Grimsby
Postcode district: DN32
Area: Lincolnshire
Survey: Free for new installations

Options for industrial roller shutters in Grimsby

Colour finishes. Leave it galvanised or choose a colour that matches the building.
Steel curtains. Heavier lath gauges for wide or exposed doors; lighter profiles where space and budget are tight.
Manual or electric. Push-up, chain hoist or motorised operation depending on how often the door opens.
Safety devices. Motorised shutters get the safety functions their risk assessment needs before handover.
Mounting options. Fixed inside, in the reveal or face-fixed outside with a protective hood.

Typical scopes of work

Fitting a galvanised roller shutter to a new bin store or recycling compound, with a lockable bottom rail.
Face-fixing a roller shutter with a steel hood where internal racking leaves no room behind the opening.
Converting hand-chained shutters on a storage unit to electric operation with key-switch controls and safety edges.

Who is responsible for door safety at a site in Grimsby?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Planning the work around your site

Sites in and around Grimsby vary from tight trade counters to large distribution yards. The survey records access for our vehicle and platform, overhead obstructions and floor condition so the installation day runs without surprises.

Guide prices

Industrial roller shutters guide prices
Item	Guide price (ex VAT)
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Manual-to-electric conversion	£1,195 – £3,195
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about industrial roller shutters

Can you convert our manual shutter in Grimsby to electric?

Often, yes, if the barrel, curtain and guides are in good condition. Our guide price for a conversion is £1,195 to £3,195 ex VAT. We become responsible for the conformity paperwork on the converted door and fit the safety devices it needs.

How much is an industrial roller shutter in Grimsby?

An electric single-skin steel roller shutter up to about 4 × 4 m has a guide price of £2,395 to £5,495 ex VAT, supplied and fitted. After a free survey in Grimsby, we confirm a fixed price for your opening in writing.

Do you remove old shutters at sites in Grimsby?

Yes. Strip-out and disposal of the old shutter is shown as a separate line in the quote, along with any repairs to the opening. The old door normally comes out as part of the same visit that fits the new one.

Industrial roller shutters near Grimsby

Besides Grimsby, we can survey and quote for sites in Cleethorpes, Hull, Scunthorpe and the rest of Lincolnshire.

Other services in Grimsby

More about Industrial roller shutters · industrial doors in Grimsby. Last updated 19 October 2026.