Industrial roller shutters in Newark-on-Trent

Quick answer

Replacing a tired shutter in Newark-on-Trent, or converting a manual one to electric? We quote a fixed price in writing after surveying the opening, then fit, test and hand over the door.

Town: Newark-on-Trent
Postcode district: NG24
Area: Nottinghamshire
Survey: Free for new installations

Options that matter on site

Manual override. If the power fails, the shutter can still be wound open by hand.
Mounting options. Fixed inside, in the reveal or face-fixed outside with a protective hood.
Steel curtains. Galvanised steel laths in gauges to suit the width and the level of abuse expected.
Compact coil. Nothing runs back under the roof: the shutter coils up neatly above the lintel.
Colour finishes. Leave it galvanised or choose a colour that matches the building.

Jobs we can carry out

Renewing the bottom rail, floor seal and end locks on a roller shutter that jams in its guides.
Converting hand-chained shutters on a storage unit to electric operation with key-switch controls and safety edges.
Face-fixing a roller shutter with a steel hood where internal racking leaves no room behind the opening.

Powered door rules that apply in Newark-on-Trent

Newark-on-Trent is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

Planning the work around your site

If your premises are leased, check whether the landlord needs to approve the work. We can provide drawings and product data for the landlord or managing agent before the order is placed.

Budgeting for industrial roller shutters in Newark-on-Trent

Industrial roller shutters guide prices
Item	Guide price (ex VAT)
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Manual-to-electric conversion	£1,195 – £3,195
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about industrial roller shutters

Do you repair roller shutters across Nottinghamshire?

Yes. We repair most makes of roller shutter across Nottinghamshire, including motors, laths, guides, springs and bottom rails. Repair visits are chargeable and priced in advance; we quote before any larger repair.

Can you convert our manual shutter in Newark-on-Trent to electric?

Often, yes, if the barrel, curtain and guides are in good condition. Our guide price for a conversion is £1,195 to £3,195 ex VAT. We become responsible for the conformity paperwork on the converted door and fit the safety devices it needs.

Does an electric roller shutter at our Newark-on-Trent site need safety devices?

It depends on the risk assessment. A hold-to-run shutter in view of the operator may need little more than force limiting, while one that closes automatically typically needs a safety edge and photocells, tested to BS EN 12453.

Industrial roller shutters near Newark-on-Trent

Working in Newark-on-Trent? We also take on jobs in Grantham, Arnold, Nottingham and across Nottinghamshire.

Other services in Newark-on-Trent

More about Industrial roller shutters · industrial doors in Newark-on-Trent. Last updated 19 October 2026.