Industrial roller shutters in Haywards Heath

At a glance

Roller shutters are a practical choice for sites in Haywards Heath (RH16): quick to fit, hard-wearing and compact. We supply them in galvanised or colour-coated steel with the controls you need.

Town: Haywards Heath
Postcode district: RH16
Area: West Sussex
Survey: Free for new installations

Options that matter on site

Steel curtains. Galvanised steel laths in gauges to suit the width and the level of abuse expected.
Mounting options. Fixed inside, in the reveal or face-fixed outside with a protective hood.
Manual or electric. Push-up, chain hoist or motorised operation depending on how often the door opens.
Compact coil. Nothing runs back under the roof: the shutter coils up neatly above the lintel.
Colour finishes. Plain galvanised or powder-coated to a RAL colour.

What this work can involve

Converting hand-chained shutters on a storage unit to electric operation with key-switch controls and safety edges.
Replacing a vehicle-damaged shutter in a trade yard with a heavier-gauge curtain and guide-rail protection.
Renewing the bottom rail, floor seal and end locks on a roller shutter that jams in its guides.

Who is responsible for door safety at a site in Haywards Heath?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Access, phasing and timing

Sites in and around Haywards Heath vary from tight trade counters to large distribution yards. The survey records access for our vehicle and platform, overhead obstructions and floor condition so the installation day runs without surprises.

Guide prices

Industrial roller shutters guide prices
Item	Guide price (ex VAT)
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Manual-to-electric conversion	£1,195 – £3,195
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about industrial roller shutters

Does an electric roller shutter at our Haywards Heath site need safety devices?

It depends on the risk assessment. A hold-to-run shutter in view of the operator may need little more than force limiting, while one that closes automatically typically needs a safety edge and photocells, tested to BS EN 12453.

How much is an industrial roller shutter in Haywards Heath?

An electric single-skin steel roller shutter up to about 4 × 4 m has a guide price of £2,395 to £5,495 ex VAT, supplied and fitted. After a free survey in Haywards Heath, we confirm a fixed price for your opening in writing.

Do you remove old shutters at sites in Haywards Heath?

Yes. Strip-out and disposal of the old shutter is shown as a separate line in the quote, along with any repairs to the opening. The old door normally comes out as part of the same visit that fits the new one.

Industrial roller shutters near Haywards Heath

Haywards Heath is in the RH16 postcode district in West Sussex. We also cover Burgess Hill, Crawley, East Grinstead.

Other services in Haywards Heath

More about Industrial roller shutters · industrial doors in Haywards Heath. Last updated 19 October 2026.