In short
Replacing a draughty roller shutter in Christchurch? We remove the old door, fit an insulated curtain with new guides, seals and motor, and hand over a tested, commissioned door with all of its paperwork.
- Town
- Christchurch
- Postcode district
- BH23
- Area
- Dorset
- Survey
- Free for new installations
What to specify
- Safety devices. Safety edges, photocells and anti-fall devices fitted as the risk assessment requires.
- Weather seals. Brush or rubber guide seals and a rubber bottom seal against draughts and rain.
- Foam-filled laths. Double-skin laths with a polyurethane core cut heat loss compared with single skin.
- Controls. From a simple button station to loops and radar, the controls match how often the door opens.
- Colour choice. Powder-coated RAL finishes to match cladding and building trims.
Jobs we can carry out
- Replacing a corroded single-skin shutter on a heated workshop with an insulated roller door and radio remote control.
- Adding wind locks and a heavier geared motor to a wide insulated roller door on an exposed elevation.
- Fitting a compact insulated service door to a plant room to reduce the noise reaching neighbouring offices.
Who is responsible for door safety at a site in Christchurch?
In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.
Planning the work around your site
Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.
Guide prices
| Item | Guide price (ex VAT) |
|---|---|
| Insulated roller door, electric (to c. 4 × 4 m) | £3,195 – £7,495 |
| Strip-out and disposal on replacement | £345 – £1,195 per door |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Frequently asked questions
How much does an insulated roller shutter door cost in Christchurch?
Our guide price for an electric insulated roller door up to about 4 × 4 m is £3,195 to £7,495 ex VAT, supplied and fitted. We survey your Christchurch opening free of charge and then put a fixed price in writing.
Do you repair insulated roller doors across Dorset?
Yes. We repair damaged laths, motors, guides and seals on most makes of insulated roller door across Dorset. Repair visits are chargeable, and planned servicing helps catch wear before a breakdown.
Does a powered insulated roller door in Christchurch need safety devices?
If the door closes automatically or can trap someone, yes. The risk assessment decides what is needed, typically a safety edge, photocells and closing forces tested to BS EN 12453, plus anti-fall protection on heavier curtains.
Insulated roller shutter doors near Christchurch
Working in Christchurch? We also take on jobs in Bournemouth, New Milton, Poole and across Dorset.
- Insulated roller shutter doors in Bournemouth
- Insulated roller shutter doors in New Milton
- Insulated roller shutter doors in Poole
- Insulated roller shutter doors in Totton
- Insulated roller shutter doors in Hythe
- Insulated roller shutter doors in Southampton
Other services in Christchurch
- Bollards and door protection
- High-speed doors
- Impact traffic doors
- Industrial door installation
- Cold store and freezer doors
- PVC strip curtains
- Hangar and large-span doors
- Door safety upgrades
More about Insulated roller shutter doors · industrial doors in Christchurch. Last updated 19 October 2026.