Insulated roller shutter doors in Hyde

At a glance

Insulated roller shutter doors for heated workshops, trade units and vehicle bays in Hyde. We survey the opening, check there is headroom for the coil and fit an electric door that keeps the warmth in and the weather out.

Town: Hyde
Postcode district: SK14
Area: Greater Manchester
Survey: Free for new installations

Options for insulated roller shutter doors in Hyde

Colour choice. Choose a colour to suit your building, with a matching hood over the coil if wanted.
Electric drive. Tubular or external geared motors with a manual override for power cuts.
Foam-filled laths. Each lath has two metal skins with insulating foam between them, so the curtain holds heat far better.
Safety devices. Safety edges, photocells and anti-fall devices fitted as the risk assessment requires.
Controls. Buttons, key switches, remotes, induction loops or radar to suit your traffic.

What this work can involve

Renewing worn guide brushes, the head seal and the bottom-rail seal on an insulated roller door that lets in draughts.
Replacing a corroded single-skin shutter on a heated workshop with an insulated roller door and radio remote control.
Adding wind locks and a heavier geared motor to a wide insulated roller door on an exposed elevation.

Safety law for industrial doors in England

Industrial doors in Hyde are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.

How the work is organised

Sites in and around Hyde vary from tight trade counters to large distribution yards. The survey records access for our vehicle and platform, overhead obstructions and floor condition so the installation day runs without surprises.

Guide prices for insulated roller shutter doors

Insulated roller shutter doors guide prices
Item	Guide price (ex VAT)
Insulated roller door, electric (to c. 4 × 4 m)	£3,195 – £7,495
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Questions from businesses in Hyde

Can you replace our old roller shutter in Hyde with an insulated one?

Yes. We recommend a complete new door rather than a new curtain on old parts, and include strip-out and disposal in the quote so the old shutter goes when the new one is fitted.

How much does an insulated roller shutter door cost in Hyde?

Our guide price for an electric insulated roller door up to about 4 × 4 m is £3,195 to £7,495 ex VAT, supplied and fitted. We survey your Hyde opening free of charge and then put a fixed price in writing.

Is there enough headroom for an insulated roller door at our Hyde unit?

The coil on an insulated curtain is larger than on a single-skin shutter, so we measure the space above the lintel on survey. Where headroom is very tight, the coil can sometimes be fitted outside the opening or a lower-profile option chosen.

Insulated roller shutter doors near Hyde

Working in Hyde? We also take on jobs in Denton, Dukinfield, Stalybridge and across Greater Manchester.

Other services in Hyde

More about Insulated roller shutter doors · industrial doors in Hyde. Last updated 19 October 2026.