Insulated roller shutter doors in Leigh

In short

We can fit foam-filled insulated roller doors in Leigh and across Greater Manchester, from small service doors to wide goods openings, with the drive, seals and controls chosen for how each door is actually used.

Town: Leigh
Postcode district: WN7
Area: Greater Manchester
Survey: Free for new installations

What we fit in Leigh

Safety devices. Every powered door gets the safety functions its risk assessment calls for and is tested before handover.
Weather seals. Brush or rubber guide seals and a rubber bottom seal against draughts and rain.
Wind locks. On exposed elevations, wind locks hook the laths into the guides so gusts cannot push the curtain out.
Colour choice. Powder-coated RAL finishes to match cladding and building trims.
Controls. Buttons, key switches, remotes, induction loops or radar to suit your traffic.

Jobs we can carry out

Replacing a corroded single-skin shutter on a heated workshop with an insulated roller door and radio remote control.
Fitting a compact insulated service door to a plant room to reduce the noise reaching neighbouring offices.
Converting a hand-chained insulated roller door to electric operation with a safety edge and photocells.

Who is responsible for door safety at a site in Leigh?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Access, phasing and timing

Where a door is being replaced, the opening has to be made secure at the end of each day. We plan strip-out, any new framing and the new door so the gap is never left open overnight unless you have agreed temporary measures.

Prices for insulated roller shutter doors in Leigh

Insulated roller shutter doors guide prices
Item	Guide price (ex VAT)
Insulated roller door, electric (to c. 4 × 4 m)	£3,195 – £7,495
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Insulated roller shutter doors in Leigh: your questions

Do you repair insulated roller doors across Greater Manchester?

Yes. We repair damaged laths, motors, guides and seals on most makes of insulated roller door across Greater Manchester. Repair visits are chargeable, and planned servicing helps catch wear before a breakdown.

Will an insulated roller door cut heating bills at our Leigh premises?

It loses much less heat than a single-skin shutter, especially with good seals and quick electric operation. How much you save depends on your building, heating system and how long the door stays open.

Is there enough headroom for an insulated roller door at our Leigh unit?

The coil on an insulated curtain is larger than on a single-skin shutter, so we measure the space above the lintel on survey. Where headroom is very tight, the coil can sometimes be fitted outside the opening or a lower-profile option chosen.

Insulated roller shutter doors near Leigh

Working in Leigh? We also take on jobs in Atherton, Tyldesley, Golborne and across Greater Manchester.

Other services in Leigh

More about Insulated roller shutter doors · industrial doors in Leigh. Last updated 19 October 2026.