At a glance
Tight headroom, cluttered ceiling, still need a warm door? For units in Burnley (BB11), we can install insulated roller doors that coil neatly above the opening and leave the roof space completely clear.
- Town
- Burnley
- Postcode district
- BB11
- Area
- Lancashire
- Survey
- Free for new installations
Options for insulated roller shutter doors in Burnley
- Foam-filled laths. Each lath has two metal skins with insulating foam between them, so the curtain holds heat far better.
- Wind locks. Lath end locks for exposed or wide doors to stop the curtain blowing out.
- Weather seals. Seals along the guides, head and bottom rail stop wind-driven rain and cold air getting in.
- Compact coil. No tracks under the roof: the door rolls up into a neat coil above the lintel.
- Electric drive. Motor inside the barrel or on its end, with a chain or handle so the door still opens without power.
What this work can involve
- Installing an insulated roller door with induction loop activation on a busy internal forklift route.
- Fitting an insulated roller door to a trade counter unit where sprinkler mains leave no room for sectional door tracks.
- Renewing worn guide brushes, the head seal and the bottom-rail seal on an insulated roller door that lets in draughts.
Who is responsible for door safety at a site in Burnley?
In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.
Keeping your site running during the work
If your premises are leased, check whether the landlord needs to approve the work. We can provide drawings and product data for the landlord or managing agent before the order is placed.
Guide prices
| Item | Guide price (ex VAT) |
|---|---|
| Insulated roller door, electric (to c. 4 × 4 m) | £3,195 – £7,495 |
| Strip-out and disposal on replacement | £345 – £1,195 per door |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Frequently asked questions
Can you replace our old roller shutter in Burnley with an insulated one?
Yes. We recommend a complete new door rather than a new curtain on old parts, and include strip-out and disposal in the quote so the old shutter goes when the new one is fitted.
Do you repair insulated roller doors across Lancashire?
Yes. We repair damaged laths, motors, guides and seals on most makes of insulated roller door across Lancashire. Repair visits are chargeable, and planned servicing helps catch wear before a breakdown.
Will an insulated roller door cut heating bills at our Burnley premises?
It loses much less heat than a single-skin shutter, especially with good seals and quick electric operation. How much you save depends on your building, heating system and how long the door stays open.
Insulated roller shutter doors near Burnley
Burnley is in the BB11 postcode district in Lancashire. We also cover Nelson, Colne, Accrington.
- Insulated roller shutter doors in Nelson
- Insulated roller shutter doors in Colne
- Insulated roller shutter doors in Accrington
- Insulated roller shutter doors in Rawtenstall
- Insulated roller shutter doors in Blackburn
- Insulated roller shutter doors in Darwen
Other services in Burnley
- Dock leveller and loading bay repairs
- Impact traffic doors
- Industrial roller shutters
- PVC strip curtains
- High-speed doors
- Dock shelters and seals
- Cold store and freezer doors
- Fire shutter servicing and drop tests
More about Insulated roller shutter doors · industrial doors in Burnley. Last updated 19 October 2026.