Quick answer
Replacing a draughty roller shutter in Leeds? We remove the old door, fit an insulated curtain with new guides, seals and motor, and hand over a tested, commissioned door with all of its paperwork.
- Town
- Leeds
- Postcode district
- LS1
- Area
- West Yorkshire
- Survey
- Free for new installations
What to specify
- Weather seals. Brush or rubber guide seals and a rubber bottom seal against draughts and rain.
- Safety devices. Safety edges, photocells and anti-fall devices fitted as the risk assessment requires.
- Compact coil. No tracks under the roof: the door rolls up into a neat coil above the lintel.
- Controls. Buttons, key switches, remotes, induction loops or radar to suit your traffic.
- Wind locks. Lath end locks for exposed or wide doors to stop the curtain blowing out.
Jobs we can carry out
- Replacing a corroded single-skin shutter on a heated workshop with an insulated roller door and radio remote control.
- Converting a hand-chained insulated roller door to electric operation with a safety edge and photocells.
- Adding wind locks and a heavier geared motor to a wide insulated roller door on an exposed elevation.
Safety law for industrial doors in England
Industrial doors in Leeds are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.
Planning the work around your site
Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.
Guide prices for insulated roller shutter doors
| Item | Guide price (ex VAT) |
|---|---|
| Insulated roller door, electric (to c. 4 × 4 m) | £3,195 – £7,495 |
| Strip-out and disposal on replacement | £345 – £1,195 per door |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Your questions about insulated roller shutter doors
Can you replace our old roller shutter in Leeds with an insulated one?
Yes. We recommend a complete new door rather than a new curtain on old parts, and include strip-out and disposal in the quote so the old shutter goes when the new one is fitted.
Will an insulated roller door cut heating bills at our Leeds premises?
It loses much less heat than a single-skin shutter, especially with good seals and quick electric operation. How much you save depends on your building, heating system and how long the door stays open.
Is there enough headroom for an insulated roller door at our Leeds unit?
The coil on an insulated curtain is larger than on a single-skin shutter, so we measure the space above the lintel on survey. Where headroom is very tight, the coil can sometimes be fitted outside the opening or a lower-profile option chosen.
Insulated roller shutter doors near Leeds
Leeds is in the LS1 postcode district in West Yorkshire. We also cover Morley, Pudsey, Batley.
- Insulated roller shutter doors in Morley
- Insulated roller shutter doors in Pudsey
- Insulated roller shutter doors in Batley
- Insulated roller shutter doors in Yeadon
- Insulated roller shutter doors in Dewsbury
- Insulated roller shutter doors in Wakefield
Other services in Leeds
- Fire shutter servicing and drop tests
- Door automation and controls
- Industrial door motor replacement
- Steel personnel and fire exit doors
- Dock leveller and loading bay repairs
- PVC strip curtains
- Sliding and folding industrial doors
- High-speed doors
More about Insulated roller shutter doors · industrial doors in Leeds. Last updated 19 October 2026.