Insulated roller shutter doors in Swindon

In short

Insulated roller doors suit premises in Swindon that need better thermal performance without giving up roof space. We supply, fit and commission them, and can service them afterwards on a schedule.

Town: Swindon
Postcode district: SN1
Area: Wiltshire
Survey: Free for new installations

What we fit in Swindon

Wind locks. Lath end locks for exposed or wide doors to stop the curtain blowing out.
Electric drive. Motor inside the barrel or on its end, with a chain or handle so the door still opens without power.
Weather seals. Brush or rubber guide seals and a rubber bottom seal against draughts and rain.
Safety devices. Safety edges, photocells and anti-fall devices fitted as the risk assessment requires.
Colour choice. Choose a colour to suit your building, with a matching hood over the coil if wanted.

Examples of work we can quote for

Installing an insulated roller door with induction loop activation on a busy internal forklift route.
Supplying insulated roller doors in one matching RAL colour across a terrace of refurbished small business units.
Fitting an insulated roller door to a trade counter unit where sprinkler mains leave no room for sectional door tracks.

Who is responsible for door safety at a site in Swindon?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Access, phasing and timing

Downtime matters on a working site, so the programme is set around your shifts. For a single door the opening is usually needed for a day; multi-door jobs are done one bay at a time so deliveries keep moving.

Guide prices for insulated roller shutter doors

Insulated roller shutter doors guide prices
Item	Guide price (ex VAT)
Insulated roller door, electric (to c. 4 × 4 m)	£3,195 – £7,495
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Insulated roller shutter doors in Swindon: your questions

Will an insulated roller door cut heating bills at our Swindon premises?

It loses much less heat than a single-skin shutter, especially with good seals and quick electric operation. How much you save depends on your building, heating system and how long the door stays open.

Do you repair insulated roller doors across Wiltshire?

Yes. We repair damaged laths, motors, guides and seals on most makes of insulated roller door across Wiltshire. Repair visits are chargeable, and planned servicing helps catch wear before a breakdown.

Is there enough headroom for an insulated roller door at our Swindon unit?

The coil on an insulated curtain is larger than on a single-skin shutter, so we measure the space above the lintel on survey. Where headroom is very tight, the coil can sometimes be fitted outside the opening or a lower-profile option chosen.

Insulated roller shutter doors near Swindon

Besides Swindon, we can survey and quote for sites in Cirencester, Chippenham, Witney and the rest of Wiltshire.

Other services in Swindon

More about Insulated roller shutter doors · industrial doors in Swindon. Last updated 19 October 2026.