Sectional overhead doors in Hammersmith

The short version

Need a new sectional door at a unit in Hammersmith? We fit insulated panel doors that lift clear of the opening and run under the roof, with vision panels, wicket doors and electric operation to suit busy sites around Greater London.

Town: Hammersmith
Postcode district: W6
Area: Greater London
Survey: Free for new installations

What we fit in Hammersmith

Wicket doors. A pass door built into the panels saves opening the whole door for pedestrians; low-threshold options reduce trips.
Vision panels. Add a row of vision panels or full-vision aluminium sections for daylight and a clear view of vehicles outside.
Paperwork. You get the manufacturer's Declaration of Performance plus commissioning and test records for your files.
Insulated panels. Steel sandwich panels with a foam core keep heat in and noise out; thicker panels are available for temperature-controlled units.
Electric drives. Shaft-mounted motors with push-button, remote, loop or radar control, and inverter drives for high-cycle bays.

Jobs we can carry out

Replacing a draughty single-skin roller shutter with an insulated sectional door and a low-threshold wicket door.
Converting a manual chain-operated sectional door to electric operation with a shaft-mounted motor, safety edge and photocells.
Adding induction loops and an inverter drive so forklifts can open a busy internal sectional door without stopping.

Powered door rules that apply in Hammersmith

Hammersmith is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

Keeping your site running during the work

Sites in and around Hammersmith vary from tight trade counters to large distribution yards. The survey records access for our vehicle and platform, overhead obstructions and floor condition so the installation day runs without surprises.

Guide prices for sectional overhead doors

Sectional overhead doors guide prices
Item	Guide price (ex VAT)
Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m)	£3,495 – £8,495
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Sectional overhead doors in Hammersmith: your questions

Which safety devices does a powered sectional door in Hammersmith need?

That comes from the risk assessment for your site, but typically a safety edge or light curtain, spring-break and cable-break protection and limited closing forces tested to BS EN 12453. Busy pedestrian routes may call for more.

How much is a sectional overhead door in Hammersmith?

Our guide price for an electric, 40 mm insulated sectional door up to about 4 × 4.5 m is £3,495 to £8,495 ex VAT, supplied and fitted. The fixed price for your opening in Hammersmith is confirmed in writing after a free survey.

How soon can a sectional door be fitted in Hammersmith?

Sectional doors are made to measure, so the manufacturer's lead time sets the date. We confirm it with the quote, book installation around your operations and fit most single doors in a day once the opening is ready.

Sectional overhead doors near Hammersmith

Our teams cover Hammersmith (W6) and nearby Shepherd's Bush, Fulham, Chiswick, along with the rest of Greater London.

Other services in Hammersmith

More about Sectional overhead doors · industrial doors in Hammersmith. Last updated 19 October 2026.