Sectional overhead doors in Orpington

The short version

Sectional overhead doors for warehouses, workshops and loading bays in Orpington. We survey the opening, specify the panels, tracks and drive to suit how the door is used, then install and commission it with full handover paperwork.

Town: Orpington
Postcode district: BR6
Area: Greater London
Survey: Free for new installations

Options that matter on site

Insulated panels. Steel sandwich panels with a foam core keep heat in and noise out; thicker panels are available for temperature-controlled units.
Electric drives. Shaft-mounted motors with push-button, remote, loop or radar control, and inverter drives for high-cycle bays.
Track layouts. We pick the track after measuring headroom and obstructions, so the door clears lights, sprinklers and crane rails.
Safety devices. Spring-break and cable-break protection, safety edges, photocells or light curtains, set up to BS EN 12453.
Wicket doors. Integrated pass doors, including low-threshold versions, for staff access without opening the main door.

What this work can involve

Installing a sectional door on low-headroom tracks in a steel-framed unit where the roof haunch sits close above the opening.
Adding induction loops and an inverter drive so forklifts can open a busy internal sectional door without stopping.
Fitting a bank of insulated sectional doors to a new distribution unit, with high-lift tracks to clear sprinkler mains and lighting.

Who is responsible for door safety at a site in Orpington?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Access, phasing and timing

Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.

Guide prices

Sectional overhead doors guide prices
Item	Guide price (ex VAT)
Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m)	£3,495 – £8,495
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Frequently asked questions

Can you replace a roller shutter with a sectional door at our Orpington unit?

Usually, yes, provided there is enough headroom and side room for the tracks. Low-headroom track kits cover many older units. We check this on the survey and include strip-out and making good in the quote.

How much is a sectional overhead door in Orpington?

Our guide price for an electric, 40 mm insulated sectional door up to about 4 × 4.5 m is £3,495 to £8,495 ex VAT, supplied and fitted. The fixed price for your opening in Orpington is confirmed in writing after a free survey.

How soon can a sectional door be fitted in Orpington?

Sectional doors are made to measure, so the manufacturer's lead time sets the date. We confirm it with the quote, book installation around your operations and fit most single doors in a day once the opening is ready.

Sectional overhead doors near Orpington

Working in Orpington? We also take on jobs in Sidcup, Swanley, Bromley and across Greater London.

Other services in Orpington

More about Sectional overhead doors · industrial doors in Orpington. Last updated 19 October 2026.