Sectional overhead doors in Lancaster

In short

Sectional doors suit premises in Lancaster that need a well-sealed, insulated opening that stays clear of the yard. We handle the survey, specification, installation and commissioning, then service the door if you want us to.

Town: Lancaster
Postcode district: LA1
Area: Lancashire
Survey: Free for new installations

Options that matter on site

Insulated panels. 40 mm PU-insulated steel panels as standard, with thicker thermal panels where heat loss matters.
Finishes. Choose a colour to match your building and a stucco or ribbed finish that hides minor knocks.
Electric drives. Shaft-mounted motors with push-button, remote, loop or radar control, and inverter drives for high-cycle bays.
Safety devices. Every powered door is fitted with the safety functions its risk assessment needs and force-tested before handover.
Track layouts. We pick the track after measuring headroom and obstructions, so the door clears lights, sprinklers and crane rails.

Typical scopes of work

Replacing a draughty single-skin roller shutter with an insulated sectional door and a low-threshold wicket door.
Converting a manual chain-operated sectional door to electric operation with a shaft-mounted motor, safety edge and photocells.
Installing a sectional door on low-headroom tracks in a steel-framed unit where the roof haunch sits close above the opening.

Who is responsible for door safety at a site in Lancaster?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

How the work is organised

Where a door is being replaced, the opening has to be made secure at the end of each day. We plan strip-out, any new framing and the new door so the gap is never left open overnight unless you have agreed temporary measures.

Guide prices

Sectional overhead doors guide prices
Item	Guide price (ex VAT)
Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m)	£3,495 – £8,495
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Sectional overhead doors in Lancaster: your questions

Do you survey sites in Lancaster before quoting?

Yes. Surveys for new and replacement doors are free. We measure the opening, headroom and obstructions, check the fixings and power supply, and discuss how the door will be used before we price it.

Will a sectional door reduce heating costs at our Lancaster premises?

An insulated, well-sealed sectional door loses much less heat than a single-skin shutter, and keeping it closed with fast electric operation helps further. Actual savings depend on your building, heating and how often the door is open.

Which safety devices does a powered sectional door in Lancaster need?

That comes from the risk assessment for your site, but typically a safety edge or light curtain, spring-break and cable-break protection and limited closing forces tested to BS EN 12453. Busy pedestrian routes may call for more.

Sectional overhead doors near Lancaster

Lancaster is in the LA1 postcode district in Lancashire. We also cover Morecambe, Fleetwood, Thornton-Cleveleys.

Other services in Lancaster

More about Sectional overhead doors · industrial doors in Lancaster. Last updated 19 October 2026.