Sectional overhead doors in Worthing

Quick answer

We can install sectional overhead doors in Worthing and across West Sussex, on new industrial units and as replacements for tired roller shutters. Every job starts with a free survey and ends with a commissioned, tested door.

Town: Worthing
Postcode district: BN11
Area: West Sussex
Survey: Free for new installations

Options that matter on site

Insulated panels. Steel sandwich panels with a foam core keep heat in and noise out; thicker panels are available for temperature-controlled units.
Safety devices. Spring-break and cable-break protection, safety edges, photocells or light curtains, set up to BS EN 12453.
Electric drives. Motorised operation with the controls you need, from a simple push-button station to induction loops and radar.
Wicket doors. Integrated pass doors, including low-threshold versions, for staff access without opening the main door.
Track layouts. Standard, low headroom, high lift and vertical lift tracks, chosen after measuring your headroom.

Typical scopes of work

Adding induction loops and an inverter drive so forklifts can open a busy internal sectional door without stopping.
Replacing a draughty single-skin roller shutter with an insulated sectional door and a low-threshold wicket door.
Supplying full-vision aluminium sections for a vehicle workshop door so technicians get daylight without opening the door.

Powered door rules that apply in Worthing

Worthing is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

Access, phasing and timing

Most installations in Worthing can be phased so part of the site keeps working. We agree access routes, exclusion zones and any temporary security with you before the team arrives, and can work early mornings, evenings or weekends where the business needs it.

Guide prices

Sectional overhead doors guide prices
Item	Guide price (ex VAT)
Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m)	£3,495 – £8,495
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Questions from businesses in Worthing

Will a sectional door reduce heating costs at our Worthing premises?

An insulated, well-sealed sectional door loses much less heat than a single-skin shutter, and keeping it closed with fast electric operation helps further. Actual savings depend on your building, heating and how often the door is open.

Do you survey sites in Worthing before quoting?

Yes. Surveys for new and replacement doors are free. We measure the opening, headroom and obstructions, check the fixings and power supply, and discuss how the door will be used before we price it.

Can you replace a roller shutter with a sectional door at our Worthing unit?

Usually, yes, provided there is enough headroom and side room for the tracks. Low-headroom track kits cover many older units. We check this on the survey and include strip-out and making good in the quote.

Sectional overhead doors near Worthing

Working in Worthing? We also take on jobs in Littlehampton, Hove, Brighton and across West Sussex.

Other services in Worthing

More about Sectional overhead doors · industrial doors in Worthing. Last updated 19 October 2026.