Sliding and folding industrial doors in Congleton

The short version

Sliding and folding industrial doors for farms, workshops, vehicle sheds and wide-span buildings in Congleton. We survey the opening and the structure, then recommend a top-hung or bottom-rolling layout that suits it.

Town: Congleton
Postcode district: CW12
Area: Cheshire
Survey: Free for new installations

What to specify

Electric operation. Motorised leaves with the safety devices needed to protect against crushing and shearing.
Top-hung or bottom-rolling. We hang the door from above or run it on a floor rail depending on what the building can support.
No headroom needed. With side-opening leaves, cranes, lights and services overhead stay clear.
Folding leaves. Where there is little wall either side, folding leaves concertina into a compact stack.
Wide spans. Very wide openings are handled by adding leaves, so width is rarely a limit.

Examples of work we can quote for

Replacing worn timber sliding doors on a storage building with steel-framed bottom-rolling doors and a wicket door.
Adding a steel support beam and top-hung track so a sliding door leaves the floor flush for forklifts.
Supplying insulated sliding leaves with edge seals for a converted building now used as a heated workshop.

Who is responsible for door safety at a site in Congleton?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Access, phasing and timing

For busy sites in Cheshire the work can be split across visits — preparation and framing first, door installation and commissioning second — so the opening is only out of action for the shortest time.

Guide prices for sliding and folding industrial doors

Sliding and folding industrial doors guide prices
Item	Guide price (ex VAT)
Sliding / folding industrial doors	£5,995 – £24,995
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about sliding and folding industrial doors

Which is better for our Congleton site, top-hung or bottom-rolling?

Top-hung keeps the floor flush but needs a strong structure overhead. Bottom-rolling suits lighter buildings but needs a clean, protected floor rail. We recommend one after checking both on survey.

Do you fit sliding doors on farm buildings around Cheshire?

Yes. We supply and fit steel sliding doors on agricultural buildings across Cheshire, including timber-clad leaves, bottom-rolling gear for lightweight portal frames and wicket doors so staff and livestock handlers can get in without opening the main leaves.

Can our existing sliding doors in Congleton be motorised?

Often, if the leaves and track are in good condition. We assess the doors, fit a drive and the safety devices needed, and take on the conformity responsibilities that come with converting a manual door to power.

Sliding and folding industrial doors near Congleton

Our teams cover Congleton (CW12) and nearby Kidsgrove, Macclesfield, Crewe, along with the rest of Cheshire.

Other services in Congleton

More about Sliding and folding industrial doors · industrial doors in Congleton. Last updated 19 October 2026.