Sliding and folding industrial doors in Brecon

At a glance

Each sliding or folding door project in Brecon starts with a free survey of the opening, side room, floor and structure, followed by a written fixed price before any work starts.

Town: Brecon
Postcode district: LD3
Area: Powys
Survey: Free for new installations

Options that matter on site

Wicket doors. A personnel door within a leaf saves sliding the main door for every visit.
Robust build. Steel-framed leaves with steel, panel or timber cladding.
Insulated options. Leaves can be filled with insulated panels and sealed along their edges to cut heat loss.
No headroom needed. Leaves move sideways, so nothing coils above or runs under the roof.
Folding leaves. Where there is little wall either side, folding leaves concertina into a compact stack.

What this work can involve

Replacing worn timber sliding doors on a storage building with steel-framed bottom-rolling doors and a wicket door.
Renewing seized trolleys and a distorted overhead track on large sliding doors to a vehicle shed.
Installing telescopic sliding doors where the wall space to one side is limited by an adjoining structure.

Who is responsible for door safety at a site in Brecon?

In Wales, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Access, phasing and timing

Where a door is being replaced, the opening has to be made secure at the end of each day. We plan strip-out, any new framing and the new door so the gap is never left open overnight unless you have agreed temporary measures.

Guide prices for sliding and folding industrial doors

Sliding and folding industrial doors guide prices
Item	Guide price (ex VAT)
Sliding / folding industrial doors	£5,995 – £24,995
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Sliding and folding industrial doors in Brecon: your questions

Can our existing sliding doors in Brecon be motorised?

Often, if the leaves and track are in good condition. We assess the doors, fit a drive and the safety devices needed, and take on the conformity responsibilities that come with converting a manual door to power.

How long does it take to fit sliding doors in Brecon?

A pair of manual sliding doors on a sound structure is usually fitted in a day or two. Large folding doors, electric operation and new steelwork add time, which we set out with your quote.

Do you fit sliding doors on farm buildings around Powys?

Yes. We supply and fit steel sliding doors on agricultural buildings across Powys, including timber-clad leaves, bottom-rolling gear for lightweight portal frames and wicket doors so staff and livestock handlers can get in without opening the main leaves.

Sliding and folding industrial doors near Brecon

Working in Brecon? We also take on jobs in Merthyr Tydfil, Ebbw Vale, Aberdare and across Powys.

Other services in Brecon

More about Sliding and folding industrial doors · industrial doors in Brecon. Last updated 19 October 2026.