Sliding and folding industrial doors in Johnstone

Quick answer

Wide opening, low eaves or an older structure in Johnstone (PA5)? A sliding or folding door can be designed around it, with the weight of the leaves carried wherever the building can safely take it.

Town: Johnstone
Postcode district: PA5
Area: Renfrewshire and Dunbartonshire
Survey: Free for new installations

Options that matter on site

Folding leaves. Bi-folding leaves stack neatly where side wall space is limited.
Wicket doors. A personnel door within a leaf saves sliding the main door for every visit.
Robust build. Steel-framed leaves with steel, panel or timber cladding.
No headroom needed. With side-opening leaves, cranes, lights and services overhead stay clear.
Insulated options. Insulated panel infill and edge seals for heated buildings.

Examples of work we can quote for

Installing telescopic sliding doors where the wall space to one side is limited by an adjoining structure.
Fitting bi-folding doors to a maintenance workshop where overhead gantry cranes rule out a roller shutter or sectional door.
Replacing a damaged floor rail and guide wheels on a bottom-rolling door struck by a vehicle.

Who is responsible for door safety at a site in Johnstone?

In Scotland, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Keeping your site running during the work

Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.

Prices for sliding and folding industrial doors in Johnstone

Sliding and folding industrial doors guide prices
Item	Guide price (ex VAT)
Sliding / folding industrial doors	£5,995 – £24,995
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Questions from businesses in Johnstone

Which is better for our Johnstone site, top-hung or bottom-rolling?

Top-hung keeps the floor flush but needs a strong structure overhead. Bottom-rolling suits lighter buildings but needs a clean, protected floor rail. We recommend one after checking both on survey.

Will a sliding door fit our building in Johnstone?

It needs wall space to the side for the leaves to slide past, or room for folded leaves to stack. We measure this on survey and choose between sliding, telescopic and folding layouts to suit what is there.

Can our existing sliding doors in Johnstone be motorised?

Often, if the leaves and track are in good condition. We assess the doors, fit a drive and the safety devices needed, and take on the conformity responsibilities that come with converting a manual door to power.

Sliding and folding industrial doors near Johnstone

Besides Johnstone, we can survey and quote for sites in Paisley, Renfrew, Clydebank and the rest of Renfrewshire and Dunbartonshire.

Other services in Johnstone

More about Sliding and folding industrial doors · industrial doors in Johnstone. Last updated 19 October 2026.