Sliding and folding industrial doors in Walton-on-Thames

Quick answer

Each sliding or folding door project in Walton-on-Thames starts with a free survey of the opening, side room, floor and structure, followed by a written fixed price before any work starts.

Town: Walton-on-Thames
Postcode district: KT12
Area: Surrey
Survey: Free for new installations

What to specify

Robust build. Steel frames carry cladding to suit the building, from profiled steel to timber boarding.
Wide spans. Openings of almost any width split into as many leaves as needed.
Top-hung or bottom-rolling. We hang the door from above or run it on a floor rail depending on what the building can support.
Wicket doors. Pass doors built into a leaf so staff need not open the whole door.
No headroom needed. Leaves move sideways, so nothing coils above or runs under the roof.

Jobs we can carry out

Installing telescopic sliding doors where the wall space to one side is limited by an adjoining structure.
Replacing a damaged floor rail and guide wheels on a bottom-rolling door struck by a vehicle.
Fitting bi-folding doors to a maintenance workshop where overhead gantry cranes rule out a roller shutter or sectional door.

Powered door rules that apply in Walton-on-Thames

Walton-on-Thames is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

Access, phasing and timing

Where a door is being replaced, the opening has to be made secure at the end of each day. We plan strip-out, any new framing and the new door so the gap is never left open overnight unless you have agreed temporary measures.

Prices for sliding and folding industrial doors in Walton-on-Thames

Sliding and folding industrial doors guide prices
Item	Guide price (ex VAT)
Sliding / folding industrial doors	£5,995 – £24,995
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Sliding and folding industrial doors in Walton-on-Thames: your questions

Which is better for our Walton-on-Thames site, top-hung or bottom-rolling?

Top-hung keeps the floor flush but needs a strong structure overhead. Bottom-rolling suits lighter buildings but needs a clean, protected floor rail. We recommend one after checking both on survey.

Will a sliding door fit our building in Walton-on-Thames?

It needs wall space to the side for the leaves to slide past, or room for folded leaves to stack. We measure this on survey and choose between sliding, telescopic and folding layouts to suit what is there.

How much do sliding or folding industrial doors cost in Walton-on-Thames?

Our guide price is £5,995 to £24,995 ex VAT, supplied and fitted, depending on size, number of leaves, infill and whether the doors are manual or electric. After a free survey in Walton-on-Thames we confirm the fixed price in writing.

Sliding and folding industrial doors near Walton-on-Thames

Walton-on-Thames is in the KT12 postcode district in Surrey. We also cover Sunbury-on-Thames, Esher, Hampton.

Other services in Walton-on-Thames

More about Sliding and folding industrial doors · industrial doors in Walton-on-Thames. Last updated 19 October 2026.