Steel personnel and fire exit doors in Rickmansworth

Quick answer

Each steel door project in Rickmansworth starts with a free survey of the opening, escape route and security needs, followed by a written fixed price before any work starts on site.

Town: Rickmansworth
Postcode district: WD3
Area: Hertfordshire
Survey: Free for new installations

What we fit in Rickmansworth

Complete doorsets. Everything comes together as a matched doorset, so it fits and works as designed.
Galvanised steel. Double-skin galvanised steel leaves with powder-coated finishes.
Emergency devices. Staff-only exits used by people who know the door can take BS EN 179 lever or pad hardware.
Louvres and vision. Louvred leaves for plant rooms and vision panels where visibility helps.
Outside access. Staff can get in from outside with a key or code, but the exit always opens freely from inside.

Jobs we can carry out

Replacing seized BS EN 179 push pads on staff-only exits in a factory or production building.
Installing a steel staff entrance door with an overhead closer and keypad access beside a loading bay.
Fitting a louvred double steel door to a plant room or electrical switch room to keep it ventilated and secure.

Door rules for workplaces in England

Doors in Rickmansworth workplaces are covered by regulation 18 of the Workplace (Health, Safety and Welfare) Regulations 1992: a door that can be pushed open from either side must give, when closed, a clear view of the space close to both sides, which is why swing doors on traffic routes have vision panels. Under the Regulatory Reform (Fire Safety) Order 2005, emergency exit doors must open easily and immediately in the direction of escape.

Keeping your site running during the work

Downtime matters on a working site, so the programme is set around your shifts. For a single door the opening is usually needed for a day; multi-door jobs are done one bay at a time so deliveries keep moving.

Prices for steel personnel and fire exit doors in Rickmansworth

Steel personnel and fire exit doors guide prices
Item	Guide price (ex VAT)
Steel personnel door, single	£845 – £1,795
Steel fire exit door with panic hardware	£1,095 – £2,395
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Steel personnel and fire exit doors in Rickmansworth: your questions

Can our Rickmansworth fire exit be locked from outside?

Yes. It can be secure from outside, with a key or code device or no external hardware, as long as it always opens from inside using the exit hardware. Never lock or chain a fire exit while people are in the building.

Can you fit fire-rated steel doors in Rickmansworth?

Yes. We supply fire-resisting steel doorsets with the manufacturer's test evidence for the rating your fire strategy needs, and install them strictly to the manufacturer's instructions, including seals, gaps and approved hardware.

Do you repair fire exit doors across Hertfordshire?

Yes. We repair and replace panic bars, emergency devices, closers, hinges and locks on steel doors across Hertfordshire. Repair visits are chargeable, and on fire-rated doors we only fit hardware covered by the door's test evidence.

Steel personnel and fire exit doors near Rickmansworth

Rickmansworth is in the WD3 postcode district in Hertfordshire. We also cover Watford, Gerrards Cross, Bushey.

Other services in Rickmansworth

More about Steel personnel and fire exit doors · industrial doors in Rickmansworth. Last updated 19 October 2026.