Steel personnel and fire exit doors in Leatherhead

The short version

Steel personnel doors and fire exit doors for warehouses, factories, plant rooms and trade units in Leatherhead. We survey each opening, specify the right hardware and rating, then supply and fit a complete steel doorset.

Town: Leatherhead
Postcode district: KT22
Area: Surrey
Survey: Free for new installations

Options that matter on site

Complete doorsets. Frame, leaf, hinges and hardware supplied as one set.
Outside access. Staff can get in from outside with a key or code, but the exit always opens freely from inside.
Galvanised steel. Double-skin galvanised steel leaves with powder-coated finishes.
Panic hardware. Where visitors or the public might need to escape, we fit full-width panic bars to BS EN 1125.
Louvres and vision. Ventilation louvres for plant and switch rooms, and glazed panels where people need to see through.

Examples of work we can quote for

Replacing seized BS EN 179 push pads on staff-only exits in a factory or production building.
Installing a leaf-and-a-half steel doorset so equipment can pass through a plant room door when needed.
Replacing a rotted timber fire exit door with a galvanised steel doorset and a BS EN 1125 panic bar.

Door rules for workplaces in England

Doors in Leatherhead workplaces are covered by regulation 18 of the Workplace (Health, Safety and Welfare) Regulations 1992: a door that can be pushed open from either side must give, when closed, a clear view of the space close to both sides, which is why swing doors on traffic routes have vision panels. Under the Regulatory Reform (Fire Safety) Order 2005, emergency exit doors must open easily and immediately in the direction of escape.

Access, phasing and timing

Where a door is being replaced, the opening has to be made secure at the end of each day. We plan strip-out, any new framing and the new door so the gap is never left open overnight unless you have agreed temporary measures.

Guide prices

Steel personnel and fire exit doors guide prices
Item	Guide price (ex VAT)
Steel personnel door, single	£845 – £1,795
Steel fire exit door with panic hardware	£1,095 – £2,395
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Steel personnel and fire exit doors in Leatherhead: your questions

Which fire exit hardware do we need at our Leatherhead site?

If members of the public or people unfamiliar with the exit may use it, panic hardware to BS EN 1125 is normally required. Exits used only by trained staff who know the door can use emergency devices to BS EN 179. If in doubt, choose BS EN 1125.

Do you repair fire exit doors across Surrey?

Yes. We repair and replace panic bars, emergency devices, closers, hinges and locks on steel doors across Surrey. Repair visits are chargeable, and on fire-rated doors we only fit hardware covered by the door's test evidence.

How long does it take to replace a steel door in Leatherhead?

Most single steel doorsets are fitted in a day, including removal of the old door, fixing the new frame and making good. Made-to-measure doorsets have a manufacturing lead time, which we confirm with the quote.

Steel personnel and fire exit doors near Leatherhead

Working in Leatherhead? We also take on jobs in Epsom, Esher, Banstead and across Surrey.

Other services in Leatherhead

More about Steel personnel and fire exit doors · industrial doors in Leatherhead. Last updated 19 October 2026.