Quick answer
Loading bays take a beating from reversing trailers. At sites in Bishop Auckland, we can replace worn dock bumpers, add wheel guides and fit corner bollards to protect doors, levellers, shelters and the building itself.
- Town
- Bishop Auckland
- Postcode district
- DL14
- Area
- County Durham
- Survey
- Free for new installations
What to specify
- Guide-rail guards. Protect the bottom of guides and tracks, where forks and pallets strike most often.
- Wheel guides. Steel guides steer trailers straight into the middle of each bay.
- Steel bollards. Rigid steel posts that stop vehicles firmly in front of guides and frames.
- Suitable fixings. We choose anchor bolts or foundations depending on the slab and expected impacts.
- Dock bumpers. Fresh bumpers keep trailers off the wall, the leveller and the shelter.
Typical scopes of work
- Adding steel guide-rail guards to a row of sectional loading doors at a distribution centre.
- Installing wheel guides and corner bollards on a run of loading bays to protect the shelter frames.
- Replacing worn-through dock bumpers so reversing trailers stop short of the wall and the leveller lip.
Who is responsible for loading bay equipment at a site in Bishop Auckland?
The employer or occupier is. PUWER 1998 requires work equipment to be maintained and inspected, and the Workplace Regulations 1992 cover vehicle and pedestrian routes around the dock. In practice that means planned servicing of levellers and doors, daily pre-use checks and a clear procedure to stop trailers moving during loading.
Keeping your site running during the work
Sites in and around Bishop Auckland vary from tight trade counters to large distribution yards. The survey records access for our vehicle and platform, overhead obstructions and floor condition so the installation day runs without surprises.
Prices for bollards and door protection in Bishop Auckland
| Item | Guide price (ex VAT) |
|---|---|
| Bollard, installed | £125 – £445 each |
| Door protection (guide-rail guards, buffers) | £345 – £1,495 per door |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Frequently asked questions
Will fitting bollards damage the floor at our Bishop Auckland site?
We check slab thickness and look for buried services before drilling. Polymer bollards and proper foundations reduce the risk of slab cracking on heavy impacts, and we recommend the right fixing for your floor.
Which bollards suit our Bishop Auckland warehouse?
Steel bollards suit most yards and external doors; polymer bollards suit busy internal routes where they will be hit often. The slab and vehicle weights decide the fixing. We recommend after seeing where your doors are being struck.
How long does it take to fit door protection in Bishop Auckland?
Usually a few hours per door for base-plated bollards and guide guards. Bollards set in foundations take longer because of coring or excavation, and are often fitted out of hours to avoid disrupting traffic.
Bollards and door protection near Bishop Auckland
Besides Bishop Auckland, we can survey and quote for sites in Newton Aycliffe, Durham, Darlington and the rest of County Durham.
- Bollards and door protection in Newton Aycliffe
- Bollards and door protection in Durham
- Bollards and door protection in Darlington
- Bollards and door protection in Chester-le-Street
- Bollards and door protection in Stanley
- Bollards and door protection in Consett
Other services in Bishop Auckland
- Industrial door replacement
- Industrial door motor replacement
- Steel personnel and fire exit doors
- Fire shutters
- Sliding and folding industrial doors
- Dock leveller and loading bay repairs
- Sectional overhead doors
- Door safety upgrades
More about Bollards and door protection · industrial doors in Bishop Auckland. Last updated 19 October 2026.