Industrial door motor replacement in Bishop Auckland

The short version

We can replace failed and obsolete door motors in Bishop Auckland and across County Durham, from tubular motors in small service shutters to heavy-duty chain drives on large, heavy sectional and sliding doors.

Town: Bishop Auckland
Postcode district: DL14
Area: County Durham
Guide price: £845 – £2,395

How we look after doors in Bishop Auckland

Brake and override. The new drive holds the door securely and can still be opened by hand in a power cut.
Panel upgrades. Older panels can be replaced at the same time for better reliability and safety.
Fault diagnosis. We check whether the motor, panel, supply or door is at fault before replacing anything.
Matched drives. Each replacement drive is selected for the door it will move, not just the old part number.
Written records. A record of the work and tests for your maintenance file.

Jobs we can carry out

Upgrading an old relay control panel to a modern unit with monitored safety edge inputs during a motor change.
Fitting a centre-mounted motor where an end-mounted replacement would clash with racking beside the door.
Re-commissioning a sectional door once a new motor is fitted, including new limit settings and closing force tests.

Who is responsible for door safety at a site in Bishop Auckland?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

How the work is organised

Before work starts we send a method statement and risk assessment, confirm who on site will be our contact and agree where materials and access equipment will go. On shared industrial estates that can mean booking yard space with the landlord.

Guide prices

Industrial door motor replacement guide prices
Item	Guide price (ex VAT)
Motor replacement	£845 – £2,395
Repair visit (attendance and first hour)	£145 – £195

Guide prices excluding VAT, which is added at the current rate where it applies. The visit price is agreed before we attend, and any repair is quoted before we carry it out.

Questions from businesses in Bishop Auckland

Should we replace the whole door instead of the motor in Bishop Auckland?

If the door itself is old, damaged or needs several other repairs, replacement can be better value. We price both where it makes sense, so you can weigh up the cost and remaining life honestly.

Will our door in Bishop Auckland be tested after the motor is changed?

Yes. We set limits, test the brake and manual override, check safety devices and measure closing forces where required, then give you a written record of the work and test results.

Is the motor really the problem with our door in Bishop Auckland?

Not always. Broken springs, damaged guides, failed panels, safety device faults and supply problems can all look like a failed motor. We diagnose first so you do not pay for a motor that will not fix the fault.

Industrial door motor replacement near Bishop Auckland

Bishop Auckland is in the DL14 postcode district in County Durham. We also cover Newton Aycliffe, Durham, Darlington.

Other services in Bishop Auckland

More about Industrial door motor replacement · industrial doors in Bishop Auckland. Last updated 19 October 2026.