Industrial door motor replacement in Consett

The short version

We can replace failed and obsolete door motors in Consett and across County Durham, from tubular motors in small service shutters to heavy-duty chain drives on large, heavy sectional and sliding doors.

Town: Consett
Postcode district: DH8
Area: County Durham
Guide price: £845 – £2,395

What's included

Brake and override. The new drive holds the door securely and can still be opened by hand in a power cut.
Fault diagnosis. Diagnosis comes first, so you only pay for the parts the door actually needs.
Matched drives. Motor torque, speed and mounting matched to the door's weight and size.
Force testing. Closing forces measured to BS EN 12453 where the door closes under power.
Written records. You receive written details of the new drive and test results for your records.

Typical scopes of work

Replacing a motor with a slipping brake on a heavy shutter that creeps down from a part-open position.
Replacing a burnt-out direct-drive motor on a loading bay door and fitting an inverter control panel at the same time.
Fitting an equivalent chain-drive motor with adapter plates to a large sectional door whose original drive is discontinued.

Who is responsible for door safety at a site in Consett?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Access, phasing and timing

Testing and repairs can mean closing an opening, so we agree timing and access with you before the visit, including early, late or weekend slots where the site needs them.

Guide prices for industrial door motor replacement

Industrial door motor replacement guide prices
Item	Guide price (ex VAT)
Motor replacement	£845 – £2,395
Repair visit (attendance and first hour)	£145 – £195

Guide prices excluding VAT, which is added at the current rate where it applies. The visit price is agreed before we attend, and any repair is quoted before we carry it out.

Your questions about industrial door motor replacement

How soon can a door motor in Consett be replaced?

Many common motors can be sourced quickly, and fitting usually takes a few hours once the drive is on site. Specialist or obsolete motors may need ordering; we tell you the lead time with the quote.

Is the motor really the problem with our door in Consett?

Not always. Broken springs, damaged guides, failed panels, safety device faults and supply problems can all look like a failed motor. We diagnose first so you do not pay for a motor that will not fix the fault.

Will our door in Consett be tested after the motor is changed?

Yes. We set limits, test the brake and manual override, check safety devices and measure closing forces where required, then give you a written record of the work and test results.

Industrial door motor replacement near Consett

Consett is in the DH8 postcode district in County Durham. We also cover Stanley, Chester-le-Street, Durham.

Other services in Consett

More about Industrial door motor replacement · industrial doors in Consett. Last updated 19 October 2026.