Industrial door motor replacement in Newcastle upon Tyne

In short

When the original motor on a door in Newcastle upon Tyne (NE1) is no longer made, we fit an equivalent drive with the adapters it needs, set new limits and test closing forces before handover.

Town: Newcastle upon Tyne
Postcode district: NE1
Area: Tyne and Wear
Guide price: £845 – £2,395

What's included

Force testing. Where it applies, we measure closing forces to confirm the door is safe after the change.
Fault diagnosis. We check whether the motor, panel, supply or door is at fault before replacing anything.
Written records. A record of the work and tests for your maintenance file.
Re-commissioning. Limits set, cycles tested and safety devices checked before handover.
Panel upgrades. New control panels with monitored safety inputs and inverter options.

Examples of work we can quote for

Re-commissioning a sectional door once a new motor is fitted, including new limit settings and closing force tests.
Replacing a motor with a slipping brake on a heavy shutter that creeps down from a part-open position.
Changing a tubular motor in a small service shutter that overheats and trips during busy periods.

Powered door rules that apply in Newcastle upon Tyne

Newcastle upon Tyne is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

Keeping your site running during the work

Before work starts we send a method statement and risk assessment, confirm who on site will be our contact and agree where materials and access equipment will go. On shared industrial estates that can mean booking yard space with the landlord.

Guide prices

Industrial door motor replacement guide prices
Item	Guide price (ex VAT)
Motor replacement	£845 – £2,395
Repair visit (attendance and first hour)	£145 – £195

Guide prices excluding VAT, which is added at the current rate where it applies. The visit price is agreed before we attend, and any repair is quoted before we carry it out.

Industrial door motor replacement in Newcastle upon Tyne: your questions

Can you replace an obsolete door motor in Newcastle upon Tyne?

Yes. Where the original is no longer made, we fit an equivalent drive with any adapter plates or couplings needed, then set limits and test the safety devices before the door goes back into use.

Is the motor really the problem with our door in Newcastle upon Tyne?

Not always. Broken springs, damaged guides, failed panels, safety device faults and supply problems can all look like a failed motor. We diagnose first so you do not pay for a motor that will not fix the fault.

Should we replace the whole door instead of the motor in Newcastle upon Tyne?

If the door itself is old, damaged or needs several other repairs, replacement can be better value. We price both where it makes sense, so you can weigh up the cost and remaining life honestly.

Industrial door motor replacement near Newcastle upon Tyne

Our teams cover Newcastle upon Tyne (NE1) and nearby Gateshead, Wallsend, Hebburn, along with the rest of Tyne and Wear.

Other services in Newcastle upon Tyne

More about Industrial door motor replacement · industrial doors in Newcastle upon Tyne. Last updated 19 October 2026.