Industrial door motor replacement in Hebburn

At a glance

Motor replacement in Hebburn starts with a chargeable diagnostic visit, then a written fixed price for the new drive and any other repairs the door needs before it goes back into use.

Town: Hebburn
Postcode district: NE31
Area: Tyne and Wear
Guide price: £845 – £2,395

What our engineers check and fix

Brake and override. Brakes tested and manual override checked on every change.
Panel upgrades. New control panels with monitored safety inputs and inverter options.
Obsolete motors. When a motor is discontinued, we fit a suitable alternative and adapt the mounting.
Force testing. Closing forces measured to BS EN 12453 where the door closes under power.
Written records. A record of the work and tests for your maintenance file.

Jobs we can carry out

Replacing a motor with a slipping brake on a heavy shutter that creeps down from a part-open position.
Replacing a burnt-out direct-drive motor on a loading bay door and fitting an inverter control panel at the same time.
Fitting an equivalent chain-drive motor with adapter plates to a large sectional door whose original drive is discontinued.

Powered door rules that apply in Hebburn

Hebburn is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

Access, phasing and timing

Testing and repairs can mean closing an opening, so we agree timing and access with you before the visit, including early, late or weekend slots where the site needs them.

Prices for industrial door motor replacement in Hebburn

Industrial door motor replacement guide prices
Item	Guide price (ex VAT)
Motor replacement	£845 – £2,395
Repair visit (attendance and first hour)	£145 – £195

Guide prices excluding VAT, which is added at the current rate where it applies. The visit price is agreed before we attend, and any repair is quoted before we carry it out.

Frequently asked questions

Should we replace the whole door instead of the motor in Hebburn?

If the door itself is old, damaged or needs several other repairs, replacement can be better value. We price both where it makes sense, so you can weigh up the cost and remaining life honestly.

Is the motor really the problem with our door in Hebburn?

Not always. Broken springs, damaged guides, failed panels, safety device faults and supply problems can all look like a failed motor. We diagnose first so you do not pay for a motor that will not fix the fault.

Will our door in Hebburn be tested after the motor is changed?

Yes. We set limits, test the brake and manual override, check safety devices and measure closing forces where required, then give you a written record of the work and test results.

Industrial door motor replacement near Hebburn

Our teams cover Hebburn (NE31) and nearby Jarrow, Wallsend, Gateshead, along with the rest of Tyne and Wear.

Other services in Hebburn

More about Industrial door motor replacement · industrial doors in Hebburn. Last updated 19 October 2026.