Industrial door replacement in Hebburn

Quick answer

Industrial door replacement in Hebburn: free survey, safe strip-out of the old door, repairs to the opening where needed, and a new door installed, commissioned and handed over with its paperwork.

Town: Hebburn
Postcode district: NE31
Area: Tyne and Wear
Survey: Free for new installations

Options that matter on site

Right door type. Like-for-like or an upgrade to suit how the opening is used now.
Opening repairs. Damaged jambs and heads repaired or new framing fitted.
Commissioning. Safety devices tested, forces measured and instructions handed over.
Disposal. Old doors taken away for recycling or disposal.
Minimal downtime. Made-to-measure door ordered first so the swap takes a day.

Typical scopes of work

Stripping out a sectional door with broken springs and an obsolete motor, and fitting a new door with an inverter drive.
Phasing the replacement of several loading doors so only one bay is out of use at a time.
Changing a manual sliding door for a new electric sectional door running on low-headroom tracks.

Safety law for industrial doors in England

Industrial doors in Hebburn are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.

Keeping your site running during the work

If your premises are leased, check whether the landlord needs to approve the work. We can provide drawings and product data for the landlord or managing agent before the order is placed.

Guide prices for industrial door replacement

Industrial door replacement guide prices
Item	Guide price (ex VAT)
Strip-out and disposal on replacement	£345 – £1,195 per door
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m)	£3,495 – £8,495

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Industrial door replacement in Hebburn: your questions

Do you replace doors at multiple sites across Tyne and Wear?

Yes. We replace doors across Tyne and Wear, including planned programmes covering several sites or a whole run of units, phased so that each site keeps operating normally while its doors are being changed.

How much does industrial door replacement cost in Hebburn?

Strip-out and disposal has a guide price of £345 to £1,195 ex VAT per door, plus the new door, for example £2,395 to £5,495 for an electric single-skin roller shutter. We confirm the full fixed price in writing after a free survey in Hebburn.

Can we change door type when replacing at our Hebburn unit?

Usually, yes, subject to headroom, side room and back room. Common upgrades are single-skin to insulated, manual to electric and conventional to high-speed. We check the space and the structure on survey before recommending a door type.

Industrial door replacement near Hebburn

Our teams cover Hebburn (NE31) and nearby Jarrow, Wallsend, Gateshead, along with the rest of Tyne and Wear.

Other services in Hebburn

More about Industrial door replacement · industrial doors in Hebburn. Last updated 19 October 2026.